June 2003 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jun 1 00:02:17 GMT 2003
Ending: Mon Jun 30 23:02:20 GMT 2003
Messages: 245

• [Diy_efi] TBI questions   Joe Lutz
• [Diy_efi] 406 fuel injected small block   andrew stegman
• [Diy_efi] 406 fuel injected small block   Bob Childers
• [Diy_efi] 406 fuel injected small block   Doug Dayson
• [Diy_efi] TBI questions   steve ravet
• [Diy_efi] TBI questions   Robert A. WArd
• [Diy_efi] TBI questions   Shannen at grolen.com
• [Diy_efi] Holley projection help needed   Jeff Behrens
• [Diy_efi] TBI questions   steve ravet
• [Diy_efi] Christopher K Kete/Corp/Cummins is out of the office.   christopher.k.kete at Cummins.com
• [Diy_efi] Holley projection help needed   Jeff Behrens
• [Diy_efi] TBI questions   Joe Lutz
• [Diy_efi] 406 fuel injected small block   Joe Lutz
• [Diy_efi] Holley projection help needed   Joe Lutz
• [Diy_efi] Northstar serial data stream   Dale Van Blokland
• [Diy_efi] Holley projection help needed   Jeff Behrens
• [Diy_efi] TBI questions   bcroe at juno.com
• [Diy_efi] Pressure readings perpendicular to airflow   Grant Beaty
• [Diy_efi] Holley projection help needed   Shannen Durphey
• [Diy_efi] TBI questions   Shannen Durphey
• [Diy_efi] Holley projection help needed   Ray Drouillard
• [Diy_efi] TBI questions   John Stricker
• [Diy_efi] Holley projection help needed   Ray Drouillard
• [Diy_efi] Pressure readings perpendicular to airflow   Greg Hermann
• [Diy_efi] Pressure readings perpendicular to airflow   Grant Beaty
• [Diy_efi] Pressure readings perpendicular to airflow   Barry
• [Diy_efi] Pressure readings perpendicular to airflow   Greg Hermann
• [Diy_efi] wayback machine fired up   steve ravet
• [Diy_efi] 406 fuel injected small block   greg gravener
• [Diy_efi] 406 fuel injected small block   Marteney, Steve
• [Diy_efi] 406 fuel injected small block   j.w.fletcher at attbi.com
• [Diy_efi] Pressure readings perpendicular to airflow   Grant Beaty
• [Diy_efi] Pressure readings perpendicular to airflow   Grant Beaty
• [Diy_efi] Need Proper tool for crimping weatherpack connectors....   Mr Motor
• [Diy_efi] Need Proper tool for crimping weatherpack   Perry Harrington
• [Diy_efi] Need Proper tool for crimping weatherpack   steve ravet
• [Diy_efi] Need Proper tool for crimping weatherpack   Mr Motor
• [Diy_efi] Need Proper tool for crimping weatherpack   Ryan McCormick
• [Diy_efi] Need Proper tool for crimping weatherpack   Mr Motor
• [Diy_efi] Need Proper tool for crimping weatherpack connector   Jack Vines
• [Diy_efi] Toyota 1MZ-FE coils ... again   Gerard
• [Diy_efi] Need Proper tool for crimping weatherpack   Ryan McCormick
• [Diy_efi] TBI questions   John Stricker
• [Diy_efi] Need Proper tool for crimping weatherpack connector   Mr Motor
• [Diy_efi] 730 harnesses   Chris Carson
• [Diy_efi] Need Proper tool for crimping weatherpack   Mr Motor
• [Diy_efi] 730 harnesses   steve ravet
• [Diy_efi] Toyota 1MZ-FE coils ... again   don.broadus at exeloncorp.com
• [Diy_efi] Toyota 1MZ-FE coils ... again   Phil Lamovie
• [Diy_efi] Toyota 1MZ-FE coils ... again   Gerard
• [Diy_efi] Which processor in 1985 vintage bmw motronic cars?   Mike Rosendale
• [Diy_efi] posting   Ray Cheng
• [Diy_efi] MAF Question   va3xcd at sympatico.ca
• [Diy_efi] MAF Question   Daniel R. Nicoson
• [Diy_efi] Toyota 1MZ-FE coils ... again   Gerard
• [Diy_efi] MAF Question   Alexei Pavlov
• [Diy_efi] posting   Alexei Pavlov
• [Diy_efi] Which processor in 1985 vintage bmw motronic cars?   Alexei Pavlov
• [Diy_efi] MAF Question   va3xcd at sympatico.ca
• [Diy_efi] MAF Question   va3xcd at sympatico.ca
• [Diy_efi] Toyota 1MZ-FE coils ... again   Andrew Theurer
• [Diy_efi] Question relating to old posts.....cheap datalogger?   Mr Motor
• [Diy_efi] Question relating to old posts.....cheap datalogger?   Tim Drinkwater
• [Diy_efi] Question relating to old posts.....cheap   Mr Motor
• [Diy_efi] Where can I learn the fundamentals of ECU?   Ray Cheng
• [Diy_efi] Question relating to old posts.....cheapdatalogger?   Robert A. Ward
• [Diy_efi] Re: Diy_efi Digest, Vol 6, Issue 9   Carter Shore
• [Diy_efi] Unstable holley projection   Jeff Behrens
• [Diy_efi] Where can I learn the fundamentals of ECU?   Matt Porritt
• [Diy_efi] Toyota 1MZ-FE coils ... again   k1drbar
• [Diy_efi] Question relating to old posts.....cheap datalogger?   Tim Drinkwater
• [Diy_efi] Unstable holley projection   Perry Harrington
• [Diy_efi] Question relating to old posts.....cheap datalogger?   Perry Harrington
• [Diy_efi] Question relating to old posts.....cheap datalogger?   steve ravet
• [Diy_efi] Toyota 1MZ-FE coils ... again   Phil Lamovie
• [Diy_efi] Toyota 1MZ-FE coils ... again   Gerard
• [Diy_efi] Question relating to old posts.....cheap   Mr Motor
• [Diy_efi] Unstable holley projection   Joe Lutz
• [Diy_efi] Question relating to old posts.....cheapdatalogger?   steve ravet
• [Diy_efi] Northstar serial data stream   Dale Van Blokland
• [Diy_efi] Northstar serial data stream   Zenon Two
• [Diy_efi] Northstar serial data stream   John Stricker
• [Diy_efi] Question relating to old posts.....cheapdatalogger?   Brian Dessent
• [Diy_efi] Question relating to old posts.....cheapdatalogger?   Perry Harrington
• [Diy_efi] What type masked ROMS on early motronic ecu's???   Mike Rosendale
• [Diy_efi] recommendations for a fuel pressure sensor   David Gravereaux
• [Diy_efi] Injector driver in BMW ECU   Electronica Del Automovil
• [Diy_efi] Question relating to old posts.....cheap   Mr Motor
• UPDATE Re: Re: [Diy_efi] Question relating to old posts.....cheap   Mr Motor
• [Diy_efi] Injector driver in BMW ECU   bcroe at juno.com
• UPDATE Re: Re: [Diy_efi] Question relating to old   Brian Dessent
• UPDATE Re: Re: [Diy_efi] Question relating to old   Mr Motor
• UPDATE Re: Re: [Diy_efi] Question relating to old   Mr Motor
• [Diy_efi] Data logging   joe bialy
• [Diy_efi] help w/ search engine   steve ravet
• [Diy_efi] Injector questions   bcroe at juno.com
• [Diy_efi] help w/ search engine   Ryan McDonnell
• Fwd: RE: [Diy_efi] help w/ search engine   Bob La Quey
• [Diy_efi] MAF Question   Alexei Pavlov
• Fwd: RE: [Diy_efi] help w/ search engine   Bob La Quey
• [Diy_efi] Lambda chip   William Frye
• [Diy_efi] Re: Diy_efi Digest, Vol 6, Issue 14   andrew stegman
• [Diy_efi] Re: Diy_efi Digest, Vol 6, Issue 14   Perry Harrington
• [Diy_efi] 83 Town Car   Adam Wade
• [Diy_efi] 83 Town Car   bruce volkers
• [Diy_efi] Lambda chip   steve ravet
• [Diy_efi] Re: Diy_efi Digest, Vol 6, Issue 14   Joe Lutz
• [Diy_efi] What type masked ROMS on early motronic ecu's???   John Andrianakis
• [Diy_efi] eprom burrner   patrick movey
• [Diy_efi] eprom burrner   Djfreggens at aol.com
• [Diy_efi] Re: Diy_efi Digest, Vol 6, Issue 15   andrew stegman
• [Diy_efi] eprom burrner   Ryan McDonnell
• [Diy_efi] eprom burrner   patrick movey
• [Diy_efi] What type masked ROMS on early motronic ecu's???   Konstantin Kotitsas
• [Diy_efi] eprom burrner   Andrew MacPherson
• [Diy_efi] Lambda chip   Makis
• [Diy_efi] Injector size Q on Maxda MX5/Miata   toby VERNON-SMITH
• [Diy_efi] Re: What type masked ROMS on early motronic ecu's   Mike Rosendale
• [Diy_efi] And for the bottom end of the market....   David
• [Diy_efi] What type masked ROMS on early motronic ecu's   bcroe at juno.com
• [Diy_efi] Re: What type masked ROMS on early motronic ecu's   Jeffrey Engel
• [Diy_efi] Injector newbie question   peterw
• [Diy_efi] ION sensing question   peterw
• [Diy_efi] ION sensing question   Bevan Weiss
• [Diy_efi] And for the bottom end of the market....   Adam Wade
• [Diy_efi] Injector newbie question   Adam Wade
• [Diy_efi] ION sensing question   Adam Wade
• [Diy_efi] And for the bottom end of the market....   peterw
• [Diy_efi] And for the bottom end of the market....   Adam Wade
• [Diy_efi] ION sensing question   Brian Michalk
• [Diy_efi] Re:ION sensing question   erce
• [Diy_efi] And for the bottom end of the market....   Phil Lamovie
• [Diy_efi] Measuring air and fuel flow   Mauricio
• [Diy_efi] And for the bottom end of the market....   efi student
• [Diy_efi] Re: Injector newbie question   joe bialy
• [Diy_efi] And for the bottom end of the market....   Adam Wade
• [Diy_efi] Re: Injector newbie question   Adam Wade
• [Diy_efi] Re: Injector newbie question - story   Aaron Bunch
• [Diy_efi] Re: Injector newbie question - story   Steve Spiers
• [Diy_efi] eprom burrner   Matt Porritt
• [Diy_efi] TPI Parts Help   Bob Childers
• [Diy_efi] AW11 MR2again   David
• [Diy_efi] And for the bottom end of the market....   bill SHURVINTON
• [Diy_efi] And for the bottom end of the market....   Moses
• [Diy_efi] TPI Parts Help   Mr Motor
• [Diy_efi] anyone seen this standalone ECU kit?   Aaron Bunch
• [Diy_efi] TPI Parts Help   Bob Childers
• [Diy_efi] And for the bottom end of the market....   Adam Wade
• [Diy_efi] And for the bottom end of the market....   bill SHURVINTON
• [Diy_efi] TPI Parts Help   Joe Lutz
• [Diy_efi] And for the bottom end of the market....   Joe Lutz
• [Diy_efi] AW11 MR2again   Joe Lutz
• [Diy_efi] 4v throttle body   Mustang Man
• [Diy_efi] anyone seen this standalone ECU kit?   Alexei Pavlov
• [Diy_efi] Re:ION sensing question   Alexei Pavlov
• [Diy_efi] And for the bottom end of the market....   peterw
• [Diy_efi] And for the bottom end of the market....   Perry Harrington
• [Diy_efi] And for the bottom end of the market....   Mike
• [Diy_efi] And for the bottom end of the market....   Moses
• [Diy_efi] And for the bottom end of the market....   Perry Harrington
• [Diy_efi] Re:ION sensing question   Brian Dessent
• [Diy_efi] Re: What type masked ROMS on early motronic ecu's   Alexei Pavlov
• [Diy_efi] Motorcycle Megasquirt hardware (Was ... And for the bottom   Moses
• [Diy_efi] Fwd: Re: [mr2] engine management system   Aaron Bunch
• [Diy_efi] Re: What type masked ROMS on early motronic ecu's   Phil Hunter
• [Diy_efi] Motorcycle Megasquirt hardware (Was ... And for the   Perry Harrington
• [Diy_efi] And for the bottom end of the market....   Joe Lutz
• [Diy_efi] Re: What type masked ROMS on early motronic ecu's   Jeffrey Engel
• [Diy_efi] Re: ION sensing question   Phil Hunter
• [Diy_efi] TPI Parts Help   Marteney, Steve
• [Diy_efi] New User - Chev TBI Conversion question(s)   Paul Ciupa
• [Diy_efi] New User - Chev TBI Conversion question(s)   Joe Lutz
• [Diy_efi] Re: Diy_efi Digest, Vol 6, Issue 24   Larry Ing
• [Diy_efi] Ion Sensing link collection   Bruce McKenzie
• [Diy_efi] New User - Chev TBI Conversion question(s)   patrick movey
• [Diy_efi] vortec FP blockoff plate?   steve ravet
• [Diy_efi] vortec FP blockoff plate?   Djfreggens at aol.com
• [Diy_efi] CMOS Levels   bcroe at juno.com
• [Diy_efi] New User - Chev TBI Conversion question(   Shannen at grolen.com
• [Diy_efi] New User - Chev TBI Conversion quest   Shannen at grolen.com
• [Diy_efi] vortec FP blockoff plate?   Shannen at grolen.com
• [Diy_efi] vortec FP blockoff plate?   Shannen at grolen.com
• [Diy_efi] CMOS Levels   Jeffrey Engel
• [Diy_efi] motronic web site   Ohio Benz
• [Diy_efi] Re: CMOS - TTL interface   Carter Shore
• [Diy_efi] Electronic expertise requested   Daniel R. Nicoson
• [Diy_efi] Electronic expertise requested   Littich, Aaron Michael (UMR-Student)
• [Diy_efi] Electronic expertise requested   Daniel R. Nicoson
• [Diy_efi] Electronic expertise requested   Jacob Rush
• [Diy_efi] Electronic expertise requested   bcroe at juno.com
• [Diy_efi] CMOS Levels   bcroe at juno.com
• [Diy_efi] Electronic expertise requested   Daniel R. Nicoson
• [Diy_efi] Electronic expertise requested   Daniel R. Nicoson
• [Diy_efi] motronic web site   Alexei Pavlov
• [Diy_efi] Electronic expertise requested   Shannen at grolen.com
• [Diy_efi] Electronic expertise requested   Daniel R. Nicoson
• [Diy_efi] Re: Electronic expertise requested   Phil Hunter
• [Diy_efi] Electronic expertise requested   Ryan McCormick
• [Diy_efi] honda prelude 1994 vtech wiring diagram   Richards, Sean
• [Diy_efi] Re: Electronic expertise requested   Daniel R. Nicoson
• [Diy_efi] Re: Electronic expertise requested   Carter Shore
• [Diy_efi] Re: motronic info   Ohio Benz
• [Diy_efi] Re: Electronic expertise requested   Jeffrey Engel
• [Diy_efi] Re: Electronic expertise requested   Daniel R. Nicoson
• [Diy_efi] Electronic expertise requested   bcroe at juno.com
• [Diy_efi] Electronic expertise requested   bcroe at juno.com
• [Diy_efi] ION coils   steve ravet
• [Diy_efi] Electronic expertise requested   Daniel R. Nicoson
• [Diy_efi] ION coils   Brian Michalk
• [Diy_efi] Electronic expertise requested   Shannen Durphey
• [Diy_efi] Re: motronic info   Alexei Pavlov
• [Diy_efi] Re: motronic info   Glen Binegar
• [Diy_efi] Electronic expertise requested   Phil Hunter
• [Diy_efi] 2002 Nissan Maxima ECU problem   Glen Binegar
• [Diy_efi] ION coils   Phil Hunter
• [Diy_efi] Electronic expertise requested   Daniel R. Nicoson
• [Diy_efi] Re: motronic info   andrius tiknius
• [Diy_efi] Where to find TPS?   Adam Wade
• [Diy_efi] engine animations   Phil Hunter
• [Diy_efi] honda prelude 1994 vtech wiring diagram   Joe Lutz
• [Diy_efi] fuel injection at 2bar?   Scott F. Williams
• [Diy_efi] honda prelude 1994 vtech wiring diagram   Scott Campbell.
• [Diy_efi] 2002 Nissan Maxima ECU problem   Hugh Keir
• [Diy_efi] fuel injection at 2bar?   Oolan Zimmer
• [Diy_efi] fuel injection at 2bar?   MMSI208 at aol.com
• [Diy_efi] fuel injection at 2bar?   Adam Wade
• [Diy_efi] long term fuel trim   Tim Marsteiner
• [Diy_efi] long term fuel trim   Adam Wade
• [Diy_efi] long term fuel trim   Tim Marsteiner
• [Diy_efi] long term fuel trim   Adam Wade
• [Diy_efi] long term fuel trim   Tim Marsteiner
• [Diy_efi] long term fuel trim   Adam Wade
• [Diy_efi] SPARKDOG   bcroe at juno.com
• [Diy_efi] Tuning on Dynapack   Todd A. Pepmeier
• [Diy_efi] Tuning on Dynapack   John Andrianakis
• [Diy_efi] Tuning on Dynapack   Adam Wade
• [Diy_efi] Tuning on Dynapack   Shannen at grolen.com
• [Diy_efi] Running headers with factory GM TBI   Jeff Behrens
• [Diy_efi] Running headers with factory GM TBI   steve ravet
• [Diy_efi] Tuning on Dynapack   Joe Lutz
• [Diy_efi] long term fuel trim   Tim Marsteiner
• [Diy_efi] long term fuel trim   steve ravet
• [Diy_efi] Test Don't Read   Doug Dayson
• [Diy_efi] long term fuel trim   Adam Wade
• [Diy_efi] Injector wanted   Rod Hiorns

Last message date: Mon Jun 30 23:02:20 GMT 2003
Archived on: Thu May 30 06:04:22 GMT 2013

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...