[Diy_efi] TPI Parts Help

[Bob Childers]

Sir,

   If you can get them at a resonable price, could I get them
from you ?  I'd be happy to compensate you whatever it costs
plus your trouble, and of course the shipping.  Let me know.

Thanks,
Bob Childers

Mr Motor wrote:

> They are just viton o-rings. you can buy a set from your dealer
> but they will rip you a new one
>
> whenever i need them i get them from a friend who works for a
> rubber o-ring company.
>
> If you need them in a big hurry, then i'd just go to the dealer
>
> ________________________________________________
> Get your own "800" number
> Voicemail, fax, email, and a lot more
> http://www.ureach.com/reg/tag
>
> ---- On Sun, 15 Jun 2003, Bob Childers (rgchild at ime.net) wrote:
>
> > Hi,
> >
> >     Just got my 88 Camaro TPI back from the powdercoater.
> Looks great !
> >
> > But, I went to reassemble it last night and discovered no
> seals on the
> > tubes
> > that go between the two fuel rails.  These seals don't seem to
> be in the
> > gasket
> > set either.  Are they supposed to be o-rings, or fitted rubber
> that goes
> > on the
> > ends of the tubes ?   I doubt that this is just a press fit,
> due to the
> > pressure of
> > the fuel.  I dont have a parts list for this and I need to
> acquire the
> > seals.  Can
> > anyone be of help.  This is the only thing keeping me from
> getting this
> > engine
> > back together.  Any help appreciated.
> >
> > Thanks,
> > Bob Childers
> > 355 SBC w/TPI going in an 86 Fiero
> >
> >
> >
> >
> > _______________________________________________
> > Diy_efi mailing list
> > Diy_efi at diy-efi.org
> > http://www.diy-efi.org/mailman/listinfo/diy_efi
> >
> >
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi