[Diy_efi] Toyota 1MZ-FE coils ... again

[don.broadus at exeloncorp.com]

Look at the other sensors for connectors. Some of the GM stuff can be used
with slight mods for example 4 pin IAC connector (inline type) are almost
identical to the Dist 4 pin ESC
connector.

-----Original Message-----
From: Gerard [mailto:gerard at poboxes.com]
Sent: Tuesday, June 03, 2003 5:22 PM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] Toyota 1MZ-FE coils ... again


Hi!

It seems my local Toyota/Lexus dealerships cannot supply me with the
4-pin connectors for the ignitions coils I got off a Lexus RX300. So,
does anyone know who makes the connectors for the DENSO coils?

I can provide some pics if that helps.

I checked some scrapyards as well, but nothing so far.

Why do I always have problems finding electrical connectors? :)

Thanks.

G.

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi


************************************************************************
This e-mail and any of its attachments may contain Exelon Corporation
proprietary information, which is privileged, confidential, or subject 
to copyright belonging to the Exelon Corporation family of Companies. 
This e-mail is intended solely for the use of the individual or entity 
to which it is addressed.  If you are not the intended recipient of this 
e-mail, you are hereby notified that any dissemination, distribution, 
copying, or action taken in relation to the contents of and attachments 
to this e-mail is strictly prohibited and may be unlawful.  If you have 
received this e-mail in error, please notify the sender immediately and 
permanently delete the original and any copy of this e-mail and any 
printout. Thank You.
************************************************************************


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi