[Diy_efi] Injector flow rate
David M. Ingebretsen
dingebre at 3dphysics.net
Thu Jan 15 21:33:19 GMT 2004
Thanks Scott and Adam. Glad to know the flow I calculated based on the constant
in the chip is in the ball park and I'll try RC Engineering if all else fails.
My thought is I'll change the constant to 178, not change the VE tables or
anything else and collect some data. The formula clearly shows the smaller
engine with the same injectors should have a smaller constant; not bigger. Just
calculating the change in the parameter based on the ratio of engine size gives
me the 178 value, too (as it better if I'm doing the math right!).
Thanks again.
Bye,
David
David M. Ingebretsen, M.S., M.E.
Collision Forensics and Engineering, Inc.
2469 Fort Union Boulevard, Suite 114
Salt Lake City, Ut 84121
dingebre at 3dphysics.net
(801) 733-5458
_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi
More information about the Diy_efi
mailing list