[Diy_efi] Re: Plumbing - EFI conversion

[clair.davis at charter.net]

Thanks.  Did you make it yourself, or buy it from a vendor?  Seems there are
several choices out there, many in the $70-90 US range.  Seems like one
could be made for less, but I need to search for materials, etc.  Time is
worth something in this adventure, but I do have the tools.  Perhaps I
should hit the McMaster-Carr web site...

Thanks again,
Clair


----- Original Message ----- 
From: "Dogleg Racing" <dogleg_racing at hotmail.com>
To: <diy_efi at diy-efi.org>
Sent: Thursday, January 29, 2004 7:56 PM
Subject: [Diy_efi] Re: Plumbing - EFI conversion


> Clair
>
> My surge tank was based on http://www.sdsefi.com/techsurge.htm except I
used
> barbs fittings
>
> Cheers
>
>
> PS I apologise for the earlier e-mail if it came thru - I'm using a
> different (read: wierd!) keyboard
>
> >From: <clair.davis at charter.net>
> >Subject: Re: [Diy_efi] Re: Plumbing - EFI conversion
> >To: "A list for Do-It-Yourself EFI" <diy_efi at diy-efi.org>
> >
> >If you've got a convenient way to do it, I'd like to see what you ended
up
> >using for the surge tank.
> >
> >Clair Davis
> >Fort Worth, TX
>

_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi