[Diy_efi] ALDL interface design(did some changes)

[Vic Belanger]

Can someone please tell me how to take my name off the email list.  I'm
going on vacation and don't want my mailbox to overfill.

Vic

----- Original Message ----- 
From: "Dennis Asp?" <hisdivineshadow at robothobos.com>
To: <diy_efi at diy-efi.org>
Sent: Monday, July 18, 2005 6:35 PM
Subject: [Diy_efi] ALDL interface design(did some changes)


> I was looking at Jonas Bylund's160 baud ALDL interface and it's very
simple,
> however for 160 baud only. However I thought, what if I change it from
this:
> http://winaldl.joby.se/interface.gif
>
> To this:
> http://unitednucular.com/misc/images/aldl-output.jpg
>
> What I did was just to connect the E and M to allow for 8192 baud
> communication but is it that simple? Would this design bomb if I tried it?
>
> Also I have another design here I copied from an interface I bought which
> didn't work, but it might have been other issues than the design, I was
just
> hoping that somebody here would know enough about these things to be able
to
> determine if this would work or not.
>
> I am running with a 1227730 ECM by the way, others have had problems with
> this unit and the '165 and '730.
> Here is the other design:
> http://unitednucular.com/misc/images/aldl2.gif
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi