[Diy_efi] ALDL interface design(did some changes)

[Mike Frels]

There's a link at the bottom of the e-mails(like this one) from the list server. Go there and all the instructions for unsubscribing are readily readable.

Mike

-----Original Message-----
From: Vic Belanger <cathyanded at netscape.ca>
Sent: Jul 18, 2005 10:13 PM
To: diy_efi at diy-efi.org
Subject: Re: [Diy_efi] ALDL interface design(did some changes)

Can someone please tell me how to take my name off the email list.  I'm
going on vacation and don't want my mailbox to overfill.

Vic

----- Original Message ----- 
From: "Dennis Asp?" <hisdivineshadow at robothobos.com>
To: <diy_efi at diy-efi.org>
Sent: Monday, July 18, 2005 6:35 PM
Subject: [Diy_efi] ALDL interface design(did some changes)


> I was looking at Jonas Bylund's160 baud ALDL interface and it's very
simple,
> however for 160 baud only. However I thought, what if I change it from
this:
> http://winaldl.joby.se/interface.gif
>
> To this:
> http://unitednucular.com/misc/images/aldl-output.jpg
>
> What I did was just to connect the E and M to allow for 8192 baud
> communication but is it that simple? Would this design bomb if I tried it?
>
> Also I have another design here I copied from an interface I bought which
> didn't work, but it might have been other issues than the design, I was
just
> hoping that somebody here would know enough about these things to be able
to
> determine if this would work or not.
>
> I am running with a 1227730 ECM by the way, others have had problems with
> this unit and the '165 and '730.
> Here is the other design:
> http://unitednucular.com/misc/images/aldl2.gif
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi