[Diy_efi] Re: MEMCAL Swap

[Lee M. Lemoine]

I'd have to see a picture of the lotus fuel injection system, got any
links?   Either way, i'd say your on target -- i just don't know how
it activates this 'second bank' you speak of.  As long as the ECM is
either providing a positive or ground trigger, you could trip a relay
to power the injectors as required...

On 7/27/05, Joel <difo8778 at kettering.edu> wrote:
> I'm considering using the pin outs from the Lotus and wiring
> my harness to it.  (I have a spare harness, and the ECM is
> easy to come by from GM).  I'm in the process of ordering the
> EPROM.
> 
> If I do that, I can wire the 2 extra injectors before the
> throttle body (Just like the lotus).
> 
> The Lotus uses almost the exact T3 that I have for my setup.
> It also produces about the same power output that I'm looking
> for (290 hp at about 1 bar of boost).
> 
> With similar power outputs and displacement the fuel
> shouldn't need too much tweaking.  I would just need to mess
> with the tables to account for a little less duration, and a
> little more lift.
> 
> What do you think about that?
> 
> -Joel
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
> 


-- 
Sincerely,

Lee M. Lemoine
http://www.turbochargedsoul.com/