[Diy_efi] SmartPlugs redux

[Adam Wade]

Additionally:

--- Adam Wade <espresso_doppio at yahoo.com> wrote:

> Many of the engineering links are broken.

None of the video links worked for me, either.  They
simply resulted in Internet Explorer locking up.

> One linked site suggests that the SmartPlugs need to
> be "timed" before use, and require a pressure sensor
> to operate properly (could this be a missing piece
> of the puzzle?), but no mention of either is made on
> the SmartPlug website, as near as I can figure.

Correction:  In their FAQ, they state that a "timing
controller" is required for machines which run at
varying engine speeds, but they do not say what a
"timing controller" is, or how it works.  Sounds
suspiciously like an...  Ignition system.

I've asked them for demo units as well, to take to my
chassis dyno with four-gas analyzer.  We'll see if
they send anything along.

| 82 Honda CX500 Turbo (Cassandra)  90 Kwak Zephyr 550 (Daphne) |
| "It was like an emergency ward after a great catastrophe; it  |
|   didn't matter what race or class the victims belonged to.   |
|  They were all given the same miracle drug, which was coffee. |
|   The catastrophe in this case, of course, was that the sun   |
|     had come up again."                    -Kurt Vonnegut     |
| M/C Fuel Inj. Hndbk. @ Amazon.com -  http://tinyurl.com/6o3ze |


	
		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - You care about security. So do we. 
http://promotions.yahoo.com/new_mail