[Diy_efi] More Analog diagnosis - Summary

[Rick McLeod]

Let me correct the comments I made below, I intended
to say:
> > Instead of incandecent lamps for the noids, use
> > LED's,
> > much lower current draw, and should work on either
> low
> > or high impedance driver systems.

> --- Rick McLeod <dunvegan at sbcglobal.net> wrote:
> 
> > Instead of incandecent lamps for the noids, use
> > LED's,
> > much lower resistance, and should work on either
> low
> > or high impedance driver systems. Make sure there
> is
> > a
> > limiting resistor of correct value, to obtain the
> > correct on current, other than that should be good
> > to
> > go.