[Diy_efi] vehicle speed sensor

Wed Sep 7 01:01:28 UTC 2005

There are the Jags That Run books which tell all and then there is a work
dear to my heart, tunetips.doc.

I think that's what it's called.

-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of loomanb at chartermi.net
Sent: Tuesday, September 06, 2005 12:33 PM
To: diy_efi at diy-efi.org
Subject: RE: RE: [Diy_efi] vehicle speed sensor

  Don't know if it's too late or not but here goes! I got my information
from the NAPA Ignition and Electrical Systems Illustrated Parts Guide that
should be in any NAPA store. You can go to www.napaechlin.com click on
catalog and punch the numbers in to get a picture of them. I can't seem to
find specs on them however, but I am sure some of you are able to come up
with that easily.  VSS101,VSS102,VSS110 are all dodge applications. VSS230,
VSS231,VSS232(looks like you can put it in the speedo cable
anywhere),VSS235,VSS236 are GM applications. VSS300,VSS301, VSS302, VSS303,
VSS304, VSS306, VSS310, VSS311, VSS312, VSS313, VSS314, VSS315(looks like
another in cable one), VSS318, VSS323, VSS329, VSS332, VSS333 and VSS340 are
Ford applications. I can give some oem numbers that are listed in the book
if needed on specific part numbers let me know. Hope this helps someone out.
Also, if anyone has some good reading or tips on tuning a GM TBI setup on a
'95 K1500 Chevy I would appre!
 ciate the tip. Bob
>
> From: "Joe Boucher" <boucherj at prodigy.net>
> Date: 2005/08/26 Fri PM 05:45:35 GMT
> To: <diy_efi at diy-efi.org>
> Subject: RE: RE: [Diy_efi] vehicle speed sensor
>
> loomanb,
>
> Take your time, your doing us a favor.
>
> What I am trying to determine is if our buddy at Jags That Run is doubling
> the price or whatever.
>
> Thanks,
>
> Joe B.
>
> -----Original Message-----
> From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
> Behalf Of loomanb at chartermi.net
> Sent: Thursday, August 25, 2005 11:20 PM
> To: diy_efi at diy-efi.org
> Subject: RE: RE: [Diy_efi] vehicle speed sensor
>
>
>   I have seen them available in Standard Ignition and Borg Warner. We have
> just changed to a NAPA store and I have not had a call for them yet. It
> seems like they fit 87-89 GM trucks and I think some Chryslers and Fords
> also. If that isn't enough info, let me know and I will get you a part
> number. I will be out of town for the weekend however, so next week will
be
> the earliest.
> >
> > From: "Joe Boucher" <boucherj at prodigy.net>
> > Date: 2005/08/26 Fri AM 02:35:42 GMT
> > To: <diy_efi at diy-efi.org>
> > Subject: RE: RE: [Diy_efi] vehicle speed sensor
> >
> > Who is the manufacture?
> >
> > Thanks,
> >
> > Joe
> >
> > -----Original Message-----
> > From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
> > Behalf Of loomanb at chartermi.net
> > Sent: Thursday, August 25, 2005 8:54 PM
> > To: diy_efi at diy-efi.org
> > Subject: Re: RE: [Diy_efi] vehicle speed sensor
> >
> >
> >   They make some that screw into the tailshaft and then the speedo cable
> > threads on to it. We sell them at my autoparts store. I can't think of
an
> > application off the top of my head, but if your local store can't help
you
> > out let me know.
> > >
> > > From: "Joe Boucher" <boucherj at prodigy.net>
> > > Date: 2005/08/26 Fri AM 12:44:13 GMT
> > > To: <diy_efi at diy-efi.org>
> > > Subject: RE: [Diy_efi] vehicle speed sensor
> > >
> > > If it's a computer controlled carb, the VSS is in the back of the
> > > speedometer.  I think.  There is an LED and a sensor for the same wave
> > > length as the LED.  A bar attached to the speedometer cable swings the
> bar
> > > between the led and the sensor.
> > >
> > > Doesn't a company called Arizona and Marine sell the vss sensor which
is
> > > used with a mechanical speedometer cable?
> > >
> > > -----Original Message-----
> > > From: diy_efi-bounces at diy-efi.org
[mailto:diy_efi-bounces at diy-efi.org]On
> > > Behalf Of Muhamad Adlan Abdullah
> > > Sent: Thursday, August 25, 2005 7:17 PM
> > > To: diy_efi at diy-efi.org
> > > Subject: [Diy_efi] vehicle speed sensor
> > >
> > >
> > > Hi,
> > >
> > > I am working on  a project on my old craburetted car. I need to get
> > > the vss out from it. It doesn't have any vss sensor, just a metal
> > > cable to the meter cluster.
> > >
> > > can anyone point me where to get any speed sensor for this purpose?
> > > some kind of an adaptor to the existing cable, that you just plug it
> > > in the gearbox, maybe?
> > >
> > > thanks in advance
> > >
> > > Adlan
> > > _______________________________________________
> > > Diy_efi mailing list
> > > Diy_efi at diy-efi.org
> > > http://lists.diy-efi.org/mailman/listinfo/diy_efi
> > >
> > >
> > > _______________________________________________
> > > Diy_efi mailing list
> > > Diy_efi at diy-efi.org
> > > http://lists.diy-efi.org/mailman/listinfo/diy_efi
> > >
> > _______________________________________________
> > Diy_efi mailing list
> > Diy_efi at diy-efi.org
> > http://lists.diy-efi.org/mailman/listinfo/diy_efi
> >
> >
> > _______________________________________________
> > Diy_efi mailing list
> > Diy_efi at diy-efi.org
> > http://lists.diy-efi.org/mailman/listinfo/diy_efi
> >
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi