[Diy_efi] boat fuel pump

[Don Sauman]

Inspected  -- ticket -- Where do you guys live???   :-)

Cheers
Don

Ulmer, James D - Denver, CO wrote:

>Pumps for boat applications have to be rated for marine use. If you
>happen to get inspected and don't have rated parts, you'll get a ticket
>and be taken off the water. It should be no big deal to get a 15psi
>marine pump and a regulator to use it with a carb for the time being.
>Spend the money once for a good pump and you'll be that far ahead when
>you convert. Remember, we are talking TBI here, not MPEFI with its 80
>psi pumps.
>
>Big Jim
>
>  
>
>>-----Original Message-----
>>From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
>>    
>>
>On
>  
>
>>Behalf Of Tom Visel
>>Sent: Thursday, April 06, 2006 10:47 AM
>>To: diy_efi at diy-efi.org
>>Subject: Re: [Diy_efi] boat fuel pump
>>
>>You can buy a pump now which will support your carb, for cheap, and
>>    
>>
>buy
>  
>
>>a pump and regulator later to feed your EFI.  This route would likely
>>    
>>
>be
>  
>
>>less complicated / expensive and just as effective as buying one pump
>>and either (1) buying a trick regulator or (2) rigging two regulators
>>    
>>
>or
>  
>
>>some other setup to dump the massive excess flow you'd have running a
>>carb with a pump designed for EFI.
>>TomV
>>
>>Steve Ravet wrote:
>>
>>    
>>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://lists.diy-efi.org/mailman/listinfo/diy_efi
>
>  
>

-- 
Don Sauman
35 Asteroid Way
Carlisle 6101
Western Australia

P: 08 9361 0337
F: 08 9361 0581
M: 0427 389 547 CDMA
M: 0413 746 695 GSM