[Diy_efi] LInk engine management user

[Van Setten, Tim @ ACSSD]

If you are in the USA, the LINK distributor that has these is Richard at Off
Road Buggy Supply.  His free phone number is 800-231-8156.
Outside the USA, I guess you'll have to deal with LINK in NZ.

I know the older units can be upgraded to the version 4 with just a chip
change.  The version 5 needs the xtal and a few other parts changed as it
uses a faster chip.  Also, the version 5 has an additional 4-Pin connector
next to the data port that has extra features.

I guess you could upgrade an early unit to a version 5, but there is no way
to get the extra features because the circuitry is not there to support it.

Hope this helps.....Tim.



-----Original Message-----
From: Remy Sabale [mailto:remy.sabale at gatepacific.com] 
Sent: Thursday, January 12, 2006 9:58 PM
To: diy_efi at diy-efi.org
Subject: RE: [Diy_efi] LInk engine management user

I received the reply from the Link tech support and they said that my
link ecu can be upgraded to V4 or V5. they charge me $330nz for the
upgrade.

Is there any other people that I can buy the chips for upgrade?