[Diy_efi] 1.3l TBI project

[Don Sauman]

Hi John

I think I would be inclined to put the system in as if it is a 1.8 and 
then make table adjustments afterwards. May not need too much.

Don

John EFI Project wrote:

> I have been reviewing the info available in this group making or 
> adapting an TBI system from a GM 1.8l.
> I was wondering how much of the programming I would or might have to 
> change(if any) to make this system work on a 1.3l motor. I have the 
> computer, TBI, wiring and all the sensors from a 1985 chevy cavalier 
> with a 4 speed. This project is going into a 1987 suzuki samurai.
>  
> I also have an old laptop (p-133) and the ALDL adapter and programming 
> to read the computer, but I am not sure how that will help me.
>  
> I am a newby at this and trying to not drown in all the available info.
>  
> Any help would be GREATLY appreciated.
>  
> John
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://lists.diy-efi.org/mailman/listinfo/diy_efi
>  
>

-- 
Don Sauman

Documentary Photography and Video
Cythera Applied Research Consultants

35 Asteroid Way
Carlisle 6101
Western Australia

P: 08 9361 0337
F: 08 9361 0581
M: 0413 746 695