[Diy_efi] 1.3l TBI project

[John EFI Project]

Is the computer for the 1.8l close enough for it to start and run?
Is the computer tables easy to "reprogram"?
I have never done anything like this before and am not wanting to mess it up
beyond repair.

John


On 1/25/06, Don Sauman <donsauman at cythera.net> wrote:
>
> Hi John
>
> I think I would be inclined to put the system in as if it is a 1.8 and
> then make table adjustments afterwards. May not need too much.
>
> Don
>
> John EFI Project wrote:
>
> > I have been reviewing the info available in this group making or
> > adapting an TBI system from a GM 1.8l.
> > I was wondering how much of the programming I would or might have to
> > change(if any) to make this system work on a 1.3l motor. I have the
> > computer, TBI, wiring and all the sensors from a 1985 chevy cavalier
> > with a 4 speed. This project is going into a 1987 suzuki samurai.
> >
> > I also have an old laptop (p-133) and the ALDL adapter and programming
> > to read the computer, but I am not sure how that will help me.
> >
> > I am a newby at this and trying to not drown in all the available info.
> >
> > Any help would be GREATLY appreciated.
> >
> > John
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Diy_efi mailing list
> >Diy_efi at diy-efi.org
> >http://lists.diy-efi.org/mailman/listinfo/diy_efi
> >
> >
>
> --
> Don Sauman
>
> Documentary Photography and Video
> Cythera Applied Research Consultants
>
> 35 Asteroid Way
> Carlisle 6101
> Western Australia
>
> P: 08 9361 0337
> F: 08 9361 0581
> M: 0413 746 695
>
>
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20060125/96f2ca0b/attachment.html