[Diy_efi] GM Fuel Pump / Tank Options

[Buck Williams]

if u put ahot sand in it froam the ovenn it maay make the tube hot eaobnough to bend just he way it is,,, ask your eye glasses lady how hot works,,, , i thaisnk about 250 buck

> Date: Wed, 29 Aug 2007 00:15:39 -0700> From: sc7500 at sonic.net> To: diy_efi at diy-efi.org> Subject: Re: [Diy_efi] GM Fuel Pump / Tank Options> > > > I kind of like the idea of bending plastic pipe with sand in it. If for no other reason than trying it to> > see how it works.> > > ACHTUNG !!> > My email got geeked this AM, but I was able to read a Critical Addendum > to my post [sorry, I didn't get the writer's name, but thank you for the > save !] and I concur.> > The sand used as filler MUST be DRY DRY DRY before heating it inside a > closed tube for bending; I apologize if my note omitted that info ~ a > good chunk of data didn't get into the message hanks to my ISP's email > dump last night.> > I like a big KABOOM as well as the next DIY'er, but not at the expense > of someone's life or limbs ~ be safe and completely dry the sand in an > oven [if it's clean, it won't smell up the house and irk the spouse...] > before use. Yes, you'll need to cap the ends of pipe before bending ~ I > like to use rubber expansion plugs, as they hold well, and are easily > removed.> > Good Luck and happy bending !> > -- > SC> > _______________________________________________> Diy_efi mailing list> Diy_efi at diy-efi.org> Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi> Main WWW page: http://www.diy-efi.org/diy_efi