[Bulk] Re: [Diy_efi] Donegan ECU

[Phillip Landry]

Talk about a small world, that must be drmayf, I believe he owns the 
Sunbeam. I'm on a
land speed racing chat group with him.  I didn't know he was running the 
Tweecer controller.
I at the very bottom of the learning curve about electronic fuel injection. 
thanks Phil

>From: "Daniel Nicoson" <A6intruder at myo-p.com>
>Reply-To: diy_efi at diy-efi.org
>To: <diy_efi at diy-efi.org>
>Subject: RE: [Bulk] Re: [Diy_efi] Donegan ECU
>Date: Fri, 12 Jan 2007 08:56:18 -0500
>
>Phil,
>
>Why not just tune the Ford computer?  A TwEECer could handle that engine
>combination just fine.
>
>www.tweecer.com
>
>In fact we have a guy running a Sunbeam with a 5.0 V-8 on the salt flats
>over on the Yahoo Groups TwEECer list.  He'd be a good resource for you.
>
>Neat project!
>
>Dan Nicoson
>
>-----Original Message-----
>From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
>Behalf Of Phil Landry
>Sent: Thursday, January 11, 2007 10:39 PM
>To: diy_efi at diy-efi.org
>Subject: [Bulk] Re: [Diy_efi] Donegan ECU
>
>Steven, I just entered into the world of homemade EFI, and was reading all
>about the Donegan ECU. I'll cut to the chase, I'm building a '32 ford
>roadster to run at Bonneville in a class that requires a 260 cubic inch
>engine. I'm looking hard a the engine  made for the Thunderbird Super 
>Coupe.
>This could be modified to run carb and regular MSD type distributor. But, I
>would like to maintain the fuel injection and electronic ignition. This
>combination  in theory should run 200 mph, with a strong enough motor to
>hold together with lots of boost. Anyway I've just started to try and 
>figure
>out the fuel injection and very interested in your project. Thanks for your
>time . Phil Landry
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi