[Diy_efi] TPI Question

[Mike Fisher]

So, I guess the next question, if you can find a stock memcal to use, which
ones will work?  Any standard numbers that I could use?  And if I can get
one, would anyone on the list be up to flashing one for me to get back up
and running until I can pick up a programmer?

On Wed, Oct 17, 2012 at 10:00 AM, Aaron <aaron at creativeoverdrive.com> wrote:

> This is what I use to reprogram the 7747 GM ECU?s****
>
> http://www.moates.net/apu1-autoprom-package-usb-version.html****
>
> ** **
>
> Since the original sized / pinned chip is getting difficult to find new, I
> use these to use a larger chip.****
>
> http://www.moates.net/g2-memory-adapter-0-60-leg-spacing.html****
>
> ** **
>
> With the above hardware and provided software, you can start with the AUJP
> code and adapt it to your needs.****
>
> Like this ?****
>
> http://www.diy-efi.org/gmecm/ecm_info/1227730/qanda.html****
>
> ** **
>
> Good luck and send us updates.****
>
> It gets lonely here when no one posts.****
>
> ** **
>
> ** **
>
> *From:* diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org] *On
> Behalf Of *Mike Fisher
> *Sent:* Wednesday, October 17, 2012 10:27 AM
>
> *To:* Do It Yourself fuel injection
> *Subject:* [Diy_efi] TPI Question****
>
> ** **
>
> Since joining this list over a year ago, I think I had only seen one email
> until the past week.  So, I am going to re-ask a question I asked a while
> back that I really didn't get any response to.
>
> I have a 91 Tuned Port Injection setup from a Firebird that I installed on
> my 87 Mustang GT that I drag race with a 355 small block in it.  I was
> running a stock AUJP chip that a friend of mine had, but he needed it back
> a few months ago (since they are getting hard to find).  Anyway, what I am
> wondering is if there is a way to program another chip with the AUJP code,
> or anything better to run a TPI system with?  I have seen that people have
> reprogrammed some of the V6 chips with the AUJP code on Ebay, but wonder if
> they actually will work right.  Thanks!
>
> Mike****
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>
>


-- 
Mike Fisher
Network Administrator
Southeast Kansas Education Service Center
http://helpdesk.greenbush.org
(620) 724-6281

This message is from the Southeast Kansas Education Service Center. This
message and any attachments may contain information that is confidential
and/or legally privileged. It is intended only for the use of the
individual(s) and entity named above as the recipient of the message. If
you are not the intended recipient of this message, or if this message has
been addressed to you in error, please notify the sender immediately. We
ask that you please delete this message, and do not deliver, distribute or
copy the message or any attachments. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20121017/9e7be359/attachment-0001.html