[Diy_efi] TPI Question

David Allen davida1
Wed Oct 17 15:25:08 UTC 2012


I would be happy to erase and reprogram one for you, if you have a V8 one!

I beleive I have already a copy of the AUJP program.
  ----- Original Message ----- 
  From: Mike Fisher 
  To: diy_efi at diy-efi.org 
  Sent: Wednesday, October 17, 2012 10:20 AM
  Subject: Re: [Diy_efi] TPI Question


  So, I guess the next question, if you can find a stock memcal to use, which ones will work?  Any standard numbers that I could use?  And if I can get one, would anyone on the list be up to flashing one for me to get back up and running until I can pick up a programmer?


  On Wed, Oct 17, 2012 at 10:00 AM, Aaron <aaron at creativeoverdrive.com> wrote:

    This is what I use to reprogram the 7747 GM ECU?s

    http://www.moates.net/apu1-autoprom-package-usb-version.html



    Since the original sized / pinned chip is getting difficult to find new, I use these to use a larger chip.

    http://www.moates.net/g2-memory-adapter-0-60-leg-spacing.html



    With the above hardware and provided software, you can start with the AUJP code and adapt it to your needs.

    Like this ?

    http://www.diy-efi.org/gmecm/ecm_info/1227730/qanda.html



    Good luck and send us updates.

    It gets lonely here when no one posts.





    From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org] On Behalf Of Mike Fisher
    Sent: Wednesday, October 17, 2012 10:27 AM


    To: Do It Yourself fuel injection

    Subject: [Diy_efi] TPI Question



    Since joining this list over a year ago, I think I had only seen one email until the past week.  So, I am going to re-ask a question I asked a while back that I really didn't get any response to.

    I have a 91 Tuned Port Injection setup from a Firebird that I installed on my 87 Mustang GT that I drag race with a 355 small block in it.  I was running a stock AUJP chip that a friend of mine had, but he needed it back a few months ago (since they are getting hard to find).  Anyway, what I am wondering is if there is a way to program another chip with the AUJP code, or anything better to run a TPI system with?  I have seen that people have reprogrammed some of the V6 chips with the AUJP code on Ebay, but wonder if they actually will work right.  Thanks!

    Mike


    _______________________________________________
    Diy_efi mailing list
    Diy_efi at diy-efi.org
    http://lists.diy-efi.org/mailman/listinfo/diy_efi





  -- 
  Mike Fisher
  Network Administrator
  Southeast Kansas Education Service Center
  http://helpdesk.greenbush.org
  (620) 724-6281

  This message is from the Southeast Kansas Education Service Center. This message and any attachments may contain information that is confidential and/or legally privileged. It is intended only for the use of the individual(s) and entity named above as the recipient of the message. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please notify the sender immediately. We ask that you please delete this message, and do not deliver, distribute or copy the message or any attachments. Thank you. 



------------------------------------------------------------------------------


  _______________________________________________
  Diy_efi mailing list
  Diy_efi at diy-efi.org
  http://lists.diy-efi.org/mailman/listinfo/diy_efi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20121017/51e911b5/attachment.html 



More information about the Diy_efi mailing list