What are most of you use to get prom programmed data

[Programmer]

Bob,

You got a good source for these "clip-on" cables ?? Some guys have said you
basically need to desolder the eprom to read them--any other ideas would be
great...

Lyndon
-----Original Message-----
From: rr <RRauscher at nni.com>
To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
Date: Sunday, August 01, 1999 1:18 PM
Subject: Re: What are most of you use to get prom programmed data


>For the eproms, an eprom reader/burner, pop the eprom out of the
>ecm first. Some use a clip-on cable to read them, as some are
>soldered in and folks only want to read them.
>
>For flash, a couple of people on the list are working with them.
>Doing the cabling and software to re-flash them.
>
>I can recommend that you do a quick search on the archives,
>there really is a ton of info on readers/burners and flash
>stuff.

>