Still have some problems - ahy ideas?

[David Cooley]

At 09:39 AM 12/8/1999 -0600, you wrote:

>It sounds like it has a bigger cam when it is cold, so there could be
>some lifter noise in there.   THey are hydralic roller lifters.  The
>preload is about 1 turn or so.
>
>The map pressure is reading 19-20, so the vacuum is more like 10 and
>when things get better the map reads about 15 so the vacuum is more
>like 15.   So something is causing me to have more air flow (IAC is
>wide open), but less vacuum, and whatever it is goes away.


This sounds like it's too lean...  That will cause a "lope" and the low 
vacuum, high IAC opening.

===========================================================
David Cooley N5XMT Internet: N5XMT at bellsouth.net
Packet: N5XMT at KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
We are Borg... Prepare to be assimilated!
===========================================================