Still have some problems - ahy ideas?

[Mike Rolica]

What is m/m/y ?  send me you bin.... I'll find it :-)  gotten pretty good
lately at it!  Hacked my buddy's 89 z24 2.8l v6 prom.
Mike Rolica
Meridian Magnesium Products
Strathroy, Ont 
Ext. 260


	-----Original Message-----
	From:	Roger Heflin [SMTP:rah at horizon.hit.net]
	Sent:	Wednesday, December 08, 1999 11:13 AM
	To:	gmecm at efi332.eng.ohio-state.edu
	Subject:	Re: Still have some problems - ahy ideas?



	On Wed, 8 Dec 1999, Bruce Plecan wrote:

	> Play with the timing/fuel some, and you'll see that you get to the
chicken,
	> and the egg routine.   Timing/mixture, can affect MAP readings.
	>   BTW, wide open for IAC is more like 250.
	> You might try reducing that, IAC count just as an experiment.
	> With my TBI (and custom pintle), had cold idle down to 1100, in
-0dF temps,
	> and smooth, then hot idle was 650 in gear, the transistion was
very linear.
	> Grumpy
	> 

	160 is wide open on mine, it will hit 160 and loose control of the
	idle and die.

	I will put some more fuel in.  I have not yet found the cold
	enrichment settings, but I know how to get some more fuel everywhere
	for the short term to see if that fixes it.

				Roger