Speaking of remote IAC

[David Cooley]

At 10:46 AM 12/20/1999 -0500, you wrote:

>Not intending to start a whole thread over 300 rpm, I just want ed to know 
>if it
>was possible for the MAX rpm I was thinking about using.  1500 might be
>necessary on a 0 degree day for a minute or two.  Definately not for 
>driving.  I
>will program the DFI to ramp down VERY quickly from max rpm, be it 1500 or 
>1200.
>I was just playing worse case on this one.  I don't have convertors, so 
>there's
>no need to start up and go. Ilike to see the temp gage move before I put 
>the car
>in drive.  I also plan on installing a remote starter on it so I can warm 
>it up
>while i brush my teeth in the morning!! :)


Ah..
Worst case is you may need larger lines to/from the IAC, but the IAC from a 
BB should be able to handle the RPM/Airflow you need.

===========================================================
David Cooley N5XMT Internet: N5XMT at bellsouth.net
Packet: N5XMT at KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
We are Borg... Prepare to be assimilated!
===========================================================