Loctite for TB fasteners?

[Teller.John at orbital.com]

I ended up using the 242 I had.  The screws holding the injector to the TB
did not have any on them when I took the TB apart, and they were pretty
tight.

Fourteen years and no loose screws suggests few vibrational/thermal
problems there...

--- John





"Bruce Plecan" <nacelp at bright.net> on 03/04/99 05:07:45 PM

Please respond to gmecm at efi332.eng.ohio-state.edu
                                                              
                                                              
                                                              
 To:      gmecm at efi332.eng.ohio-state.edu                     
                                                              
 cc:      (bcc: John Teller/ORBVA)                            
                                                              
                                                              
                                                              
 Subject: Re: Loctite for TB fasteners?                       
                                                              





-----Original Message-----
From: Teller.John at orbital.com <Teller.John at orbital.com>
To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
Date: Thursday, March 04, 1999 11:59 AM
Subject: Loctite for TB fasteners?

I've done many (least, 50), and always just used the red..  I'm very
careful, about staking.
Bruce