kPa under boost
Espen Hilde
mwichstr at online.no
Tue Nov 16 22:32:39 GMT 1999
Great idee!
Maybe a mix of o2 and egt? When egt reaches a certain temp it modifyes
the o2 sensor voltage?Great for turbos?
What about using a shop 4 gas analyser and with a time delay set up store
the datas .......you know a lot more about the combustion than from a wide
ban 02..... just use a 12v to 110/220v converter.
How can NOX be measured? Is not the NOX increasing during high combustion
temps and knoks?
In the creative corner to day.....ready to take on the CSH
Espen
> > By the way O2v, if speaking of the oem gm one, can be totally
> misleading.
> > Try just a dab of silicone near it. It can read low, and be Pig Rich..
>
> SO the next GM system will use an EGT - to Voltage type temp sensor,
wired
> to the ECM?
>
> one chap in here a while ago came up with an idea to translate MAP input
to
> simulate a MAF sensor - How about an electronic EGT sensor that
reproduces
> the curve of an O2 sensor?!
>
More information about the Gmecm
mailing list