Tailor made patches?

[Bruce Plecan]

----- Original Message -----
From: DC Smith <morepoweral at tetranet.net>
Subject: Re: Tailor made patches?


| Hey bruce,
|  Don't know what got ya on the 4.1 bit. Some guys run em with good luck
| and some crack blocks. Some can get their head gaskets to seal and..
|  You get my drift. I'm stickin with the 3.8 for now, myself.. :)

I'm just going for like 350-375 HP (under all conditions).  So the boost
will be more then reasonable..  I want a cruiser not a work on all the time
car.  Also,
in none boost situations, the extra 300 cc is welcome.

|  Did you get the proper BQ or BR tranny?

Mines 85 TType, gone thru by a true tranny guru, who knows me, and gives me
a warranty even with the abuse I throw at them.

|  Hmmm Building a Turbo TA from scratch.. I've considered doing the same
| thing myself. If I can be of any assistance.. well you know.

The only two parts, that I never found were the tranny cross member, and I
have a tracing for that.  Steve K is doing a set of engine mount brackets.

|  This will be a EFI'd motor with a gmecm running it? <grin>

It's the reason I'm even here..   Ya I think a gmecm would be in good
form.....
Grumpy
       Doc relocated the mailbox today.  He just had to take action, after
getting so many "you've got mail" messages, on his PC.  He doesn't need all
that exercise.
|
|
| Bruce Plecan wrote:
| >
| > ----- Original Message -----
| > From: Dave Zug <dzug at delanet.com>
| > To: <gmecm at efi332.eng.ohio-state.edu>
| > Sent: Tuesday, November 23, 1999 1:36 AM
| > Subject: Re: Tailor made patches?
| >
| > I did, get 2 blocks, 1 crank from Jesse.
| > Grumpy
| >
| > | Hey BOB, I'm in MD, did you get the 4.1's from a chap named jesse?  he
has
| > 3
| > | from caddys with turbo-rated factory cranks in them.
| > |
| > | I have 2 TPI 305's tryin to get rid of, and harness/computer/TPI etc
too.
| > |
| > |
|
| --
| ***********************************************************************
| Dan Smith      84 Regal   11.841 at 115.09     GSCA# 1459
| St.Charles, Missouri
| mailto:morepoweral at tetranet.net
| http://www.tetranet.net/users/morepoweral
| ***********************************************************************
|