First time EFIer's

[ECMnut at aol.com]

Grumpy's right,  I think Gar put a little more eloquently some time ago,
but you can't come to a list like this, and expect everything you read,
or are GIVEN for free, to be absolutely 100% correct & on-the-money...
If you explode your project, you missed something..  Don't point fingers.
This is a part of the automotive world where you accept credit for
both successes and failures.  Do your homework, read, test, read, test, etc..
You have to stay awake and pay attention if you're assembling anything
mechanical or electronic.  .  This is not paint by numbers, but "DIY"-efi...
If you don't invest in the time, equipment, and education
(101 & other archives), to know what you're doing,
use a shop or vendor that has and does..
 If everything goes perfectly in your EFI project, you'll miss
some great learning opportunities..  Monitor everything you can,
and have fun. 
Mike V

> Here's about how I feel about it...
>  Here's an absolute answer then, do it your self and find out....
>  Yes, injector sizing varies by application some, haven't you read that yet.
>  There are no absolutes in life, and EFI!!!!..
>  That's why you plan ahead, so you don't paint yourself inna corner.
>  That's why opinions vary,
>  You want SEFI, and haven't even played with TBI enough to know what your 
>  doing, fine.