TPI Runner Question

[Bruce Plecan]

Well just wish I could send you a photo, cause my early TB has two cutouts
to the channels behind the butterflies, from the IAC.
This is a TPI for the early heads, and has a 9th injector.
I have it in my lap as I type right now.
The only passage ways are the PCV, and a ported vac signal.
Very easy to look at and see what's goning on with this one.
Ther may be more then one version of TB but I have this one here if anyone
wants to drop by an look at it, so there is no doubt about what I have in my
hands.
Bruce
  I'm not claiming they are all this way, I'm just saying the one I have
here is this way.





> Bruce - the TB's IAC outlet on pre '89 TPIs mates with the entrance to the
> 'special' passageway of the plenum.  Thus, if you don't have the correct
> runner that mates with the plenum then the IAC does NOTHING because the
> IAC air has never gets into the incoming air.
> Tim


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org