acceleration stumble

[chetwagner at uswest.net]

An update on the accel stumble, and the results are less than good.  
I still have the problem of the engine leaning out during acceleration. 
 When starting from a standing stop, the engine leans out and has 
no power and tries to shake everything apart from bucking so hard.  
It does this for about 3-7 seconds then clears up, but only when the 
engine goes back into closed loop.  The strange thing is that the 
engine does not do this when in openloop.  I am using the SyTy 
code as a backup for now, but it only runs with the 2 bar setting on 
and running a 1 bar map.  Has anyone converted this code to a NA 
engine?  If so, let me know what you did.  

On 7 Sep 2000, at 21:34, chetwagner at uswest.net wrote:

> Here is one to get your gears turning.  This is in reference to the 8D 
> code chips(ANHT, AUJP, HOWELL730, and so on.  The engine 
> idles great and runs great once you get up to speed, but right of 
> idle, the engine goes extremly lean and almost dies.  No amount of 
> accelerator pedal travel will clear the problem.  The only bin that 
> does not do this is the howell bin, but it has an idle problem(more to 
> come later).  I have changed everything relating to the accel enrich 
> functions, but nothing helps.  The only thing keeping my from 
> running this code in my conversion, so any insight into this problem 
> would be greatly appreciated.  BTW, I am using it in a 1.7L 4 cyl 
> engine with port injection.
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 
> 


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org