Netres availability

[Ludis Langens]

ae2598 at wayne.edu wrote:
> 
> They used the '165 from '91-up for the Tech-4 S-trucks.

'87-up.

> Prior to that,
> they used the 1226864 C3 ECM.

85 and 86 used the '6864, the same as passenger cars for the same
interval.  This ECM does not use a removeable netres (aka CALPAK).  The
netres circuit is built into this ECM.  So - a netres is not available
for the 2.5 engine.  To use a '7747 on a 2.5 will require experimenting
with netres's for other engines.  Some numbers can be found here:

  http://www.cruzers.com/~ludis/c3xref.html

-- 
Ludis Langens                               ludis (at) cruzers (dot) com
Mac, Fiero, & engine controller goodies:  http://www.cruzers.com/~ludis/
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org