Running 8 low impedence injectors on GM ECM using an auxilliary injector driver?

[Bruce Plecan]

The 730 has just one injector driver.
The 2 leads are for current handling, and redundacy.
So you have one output from the ecm to your driver box's input.
The batch in the 730s case is all of them
Bruce



> Has anyone ever tried running 8 low impedance injectors with an auxiliary
> injector driver that is triggered by a GM ECM (like a 1990 F-body ECM)?
> Accel/DFI makes a low impedance injector driver/controller that allows EFI
> systems for high impedance injectors to trigger low impudence injectors.
We
> have used this system on some of the Accel/DFI applications (before they
> came out with an ECM that could control low impedance injectors directly).
> Anyone see any problems controlling this device from a GM factory ECM?
Would
> you use one to control all 8 or two, one to control each bank of 4
> injectors?
> Jason

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org