February 2001 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Feb 1 00:13:49 GMT 2001
Ending: Wed Feb 28 22:43:00 GMT 2001
Messages: 615

• bin for 89 350 tpi 165   Chris Abreu
• recommended eprom speeds   Chris Abreu
• Memcal Schematics/Resistor Packs?   Justin Albury
• Emulator + Editor ?????   Eric Aos
• A standard defition format for ECMs, with LT1 as an exampl   Eric Aos
• Emulator + Editor ?????   Eric Aos
• Earnhardt past away   Eric Aos
• GM Fuel Pump control scheme   Louis Baiani
• RPM limits of GM computer/ignition module?   Christopher Bennight
• RPM limits of GM computer/ignition module?   Christopher Bennight
• RPM limits of GM computer/ignition module?   Christopher Bennight
• RPM limits of GM computer/ignition module?   Christopher Bennight
• RPM limits of GM computer/ignition module?   Christopher Bennight
• ECM for '95 5.7 Yukon?   Reid Bishop
• Palm interface for the '7747   Reid Bishop
• ECM for '95 5.7 Yukon?   Reid Bishop
• ECM for '95 5.7 Yukon?   Reid Bishop
• A standard defition format for ECMs   Paul Blackmore
• tbi injector install question   Alain Blais
• Cheap Shift Light   Alain Blais
• T56 Questions... was : Re: Document re-uploaded   Jim and Sharon Brady
• MAF with 747? 730? or any other later ecm?   Brandon
• Blown 350 with 1227730 ECM   Meister Brau
• Turbo Selection   Brent
• RPM limits of GM computer/ignition module?   Eric Bryant
• Programmers and emulators   Steven Ciciora
• RPM limits of GM computer/ignition module?   Eric Clark
• GM TPS to Ford throttle body   Daniel Collins
• ecm test bench   Daniel Collins
• ecm test bench   Daniel Collins
• Adjustable VSSB   Daniel Collins
• Adjustable VSSB   Daniel Collins
• Palm interface for the '7747   Jim Cottrill
• '165 Minimum Air Question...   Kevin Crain
• Profiteers   Kevin Crain
• Later MAFs   Kevin Crain
• RPM limits of GM computer/ignition module?   Kevin Crain
• GM 808 .ECU file for VN/VP   Glenn D
• HELP VN WRONG POLARITY!   Glenn D
• GM TPS to Ford throttle body   Glenn D
• GM TPS to Ford throttle body   Glenn D
• GM TPS to Ford throttle body   Glenn D
• 2732A EPROM problem   Zacek DenniS
• GMECM Digest V2 #780   Dig
• Helpful Suggestion   Dig
• Quick question on GM truck PCM ALDL lines   Shannen Durphey
• Update: Closed Loop Disable in $6E   Shannen Durphey
• Interesting bulletin regarding O2 + exhaust   Shannen Durphey
• TBI injectors (just humor)   Shannen Durphey
• GM TPS to Ford throttle body   Shannen Durphey
• '88 Corvette Binary & Archives   Shannen Durphey
• Next round of viruses?   Shannen Durphey
• Plena volume   Shannen Durphey
• '165 Minimum Air Question...   Shannen Durphey
• '165 Minimum Air Question...   Shannen Durphey
• '165 Minimum Air Question...   Shannen Durphey
• VSS buffer location   Shannen Durphey
• Mysterious black box id...   Shannen Durphey
• '165 Minimum Air Question...   Shannen Durphey
• '165 Minimum Air Question...(Round 2)   Shannen Durphey
• s-10 idle ( was '165 Minimum Air Question...)   Shannen Durphey
• s-10 idle ( was '165 Minimum Air Question...)   Shannen Durphey
• piston identification   Shannen Durphey
• '165 Minimum Air Question...   Shannen Durphey
• Remember trace detonation, headgaskets and bearings   Shannen Durphey
• Earnhardt past away   Shannen Durphey
• Adjustable VSSB   Shannen Durphey
• Adjustable VSSB   Shannen Durphey
• Adjustable VSSB   Shannen Durphey
• Adjustable VSSB   Shannen Durphey
• anyone have any runners ?   Shannen Durphey
• Blown 350 with 1227730 ECM   Shannen Durphey
• 1227148 to 1227749 conversion?   Shannen Durphey
• RPM limits of GM computer/ignition module?   Shannen Durphey
• some table locations I found within 1227429 ECM prom   Shannen Durphey
• application info?   Shannen Durphey
• RPM limits of GM computer/ignition module?   Shannen Durphey
• Helpful suggestion   Shannen Durphey
• Helpful suggestion   Shannen Durphey
• Helpful suggestion   Shannen Durphey
• Helpful suggestion   Shannen Durphey
• Helpful suggestion   Shannen Durphey
• Programmers and emulators   Shannen Durphey
• Adjustable VSSB   EK
• Helpful suggestion   Dave & Irina Eicher
• Turbo Project update. The good, bad and ugly.   Jon Fedock
• Turbo Project update. The good, bad and ugly.   Jon Fedock
• Turbo Project update. The good, bad and ugly.   Jon Fedock
• Turbo Project update. The good, bad and ugly.   Jon Fedock
• Turbo Project update. The good, bad and ugly.   Jon Fedock
• Blown 350 with 1227730 ECM   Jon Fedock
• Blown 350 with 1227730 ECM   Jon Fedock
• Blown 350 with 1227730 ECM   Jon Fedock
• Blown 350 with 1227730 ECM   Jon Fedock
• Blown 350 with 1227730 ECM   Jon Fedock
• more on netres   Jon Fedock
• Blown 350 with 1227730 ECM   Jon Fedock
• Blown 350 with 1227730 ECM   Jon Fedock
• Eprom Programmer and Pic Programmer   Peter Fenske
• Halp BBC Tuned port manifold   Peter Fenske
• Injector ID help please   Peter Fenske
• Fw: checking up   Peter Fenske
• '88 Corvette Binary & Archives   Scott Fraser
• '88 Corvette Binary & Archives   Scott Fraser
• Bin Library   Gabe
• Bin Library   Gabe
• 16168625 ECM   Gabe
• EFI POWWOW   Jeremy Gonyou
• Need help   Jeremy Gonyou
• Off topic: Injectors Wanted   Jeremy Gonyou
• Removing A/C from a 730 vehicle   Jeremy Gonyou
• Remote EPROM   Jeffery Green
• Mechanical end of K/S tests   Jeffery Green
• 165 $6E MAF scalar   Daniel E. Griffin
• Information on EFI Org   Joseph & Melissa Guthrie
• 1227730 with 2 bar Map?   John S. Gwynne
• Remote EPROM   Christian Hack
• Running 8 low impedence injectors on GM ECM using an auxilliary injector driver?   Jason R. Haines
• piston identification   Greg Hermann
• 747 newbie question   Brian Hourigan
• Knock Sensor Light and Alarm problems...   Robert W. Hughes
• Cherry Semiconductors Group buy   Carl Ijames
• ecu files for a TR 1227148 ECM?   Carl Ijames
• 1227148 to 1227749 conversion?   Carl Ijames
• 2732A EPROM problem   Carl Ijames
• NTK sensor was RE: GMECM Digest V2 #792   JimSloan
• Fwd: Re: RPM limits of GM computer/ignition module?   Dale Klein
• 98 Vs 94 4L60E   Dale Klein
• Turbo Project update. The good, bad and ugly.   Jake Kooser
• MAFs   Jake Kooser
• Knock Sensor Light and Alarm problems...   Jake Kooser
• [73-87Chevy/GMCTrucks]Vortechs, TBI, and Edelbrock too...oooouu   Jake Kooser
• 1228746   Ludis Langens
• MAFs   Ludis Langens
• Knock Sensor Light and Alarm problems...   Ludis Langens
• The count is in...   Ludis Langens
• AKFM in 730   Ludis Langens
• Palm interface for the '7747   Ludis Langens
• Looking for a date for the gmecm eeprom   Ludis Langens
• Donor found!   Ludis Langens
• Need help   Ludis Langens
• Need help   Ludis Langens
• GM 747 EPROM   Ludis Langens
• '165 Minimum Air Question...   Ludis Langens
• P4 ECM #1227748 questions   Ludis Langens
• P4 ECM #1227748 questions   Ludis Langens
• dats a lotsa bins!   Ludis Langens
• Emulators, EconoRom III   Ludis Langens
• Blown 350 with 1227730 ECM   Ludis Langens
• Emulators, EconoRom III   Ludis Langens
• more on netres   Ludis Langens
• 1227148 to 1227749 conversion?   Ludis Langens
• RPM limits of GM computer/ignition module?   Ludis Langens
• 1227730 with 2 bar Map?   Ludis Langens
• RPM limits of GM computer/ignition module?   Ludis Langens
• AANL4045 bin   Ludis Langens
• Information on EFI Org and a completely unrelated matter   Allan Langford
• Earnhardt past away   Allan Langford
• anyone have any runners ?   Allan Langford
• Need help in NH   Mitch Louole
• The count is in...   Mitch Louole
• GM 747 EPROM   Jove Malcolm
• another 'tuning' suggestion...   Edward J. Malkiewicz
• dats a lotsa bins!   Craig Marcho
• Programmers and emulators   Craig Marcho
• AKFM in 730   Tom Marracci
• GMECM Digest V2 #807   Tom Marracci
• '94 Jimmy 4.3L and Diacom   Marteney, Steven J.
• 165 ECU File   Marteney, Steven J.
• 165 ECU File   Marteney, Steven J.
• 165 ECU File   Marteney, Steven J.
• 165 ECU File   Marteney, Steven J.
• 165 $6E MAF scalar   Marteney, Steven J.
• 165 $6E MAF scalar   Marteney, Steven J.
• 165 $6E cold idle   Marteney, Steven J.
• 165 $6E cold idle   Marteney, Steven J.
• 165 ECU File   Marteney, Steven J.
• 165 ECU File   Marteney, Steven J.
• 165 ECU File   Marteney, Steven J.
• Information on EFI Org   Marteney, Steven J.
• A standard defition format for ECMs, with LT1 as an example   Marteney, Steven J.
• A standard defition format for ECMs, with LT1 as an exampl   Marteney, Steven J.
• Emulator + Editor ?????   Marteney, Steven J.
• Hondo WB O2 and PCV valve   Marteney, Steven J.
• anyone have any runners ?   Marteney, Steven J.
• Update: $6E CL Disable and Idle   Marteney, Steven J.
• TPI fuel pressure   Marteney, Steven J.
• TPI fuel pressure   Marteney, Steven J.
• TPI fuel pressure   Marteney, Steven J.
• TPI fuel pressure   Marteney, Steven J.
• recommended eprom speeds   Marteney, Steven J.
• Profiteers   Andrew K. Mattei
• 94 Buick LeSabre ALDL Pinouts   Andrew K. Mattei
• RPM limits of GM computer/ignition module?   Andrew K. Mattei
• P4 ECM #1227748 questions   Nick McAlpin
• P4 ECM #1227748 questions   Nick McAlpin
• ALDL link, carbytes?   Nick McAlpin
• P4 ECM #1227748 questions   Nick McAlpin
• ECM 1227748, creating a new ECU file?   Nick McAlpin
• ECM 1227748, creating a new ECU file?   Nick McAlpin
• ECM 1227748, creating a new ECU file?   Nick McAlpin
• ECM 1227748, creating a new ECU file?   Nick McAlpin
• RPM limits of GM computer/ignition module?   Nick McAlpin
• The count is in...   Andrew McRory
• The count is in...   Andrew McRory
• The count is in...   Andrew McRory
• Injector ID help please   Andrew McRory
• Injector ID help please   Andrew McRory
• Testing 808 w/o engine/car -- was cooked VN   Roger Merritt
• The count is in...   Keith D. Miller
• The count is in...   Keith D. Miller
• Helpful suggestion   Keith D. Miller
• Helpful suggestion   Keith D. Miller
• Helpful suggestion   Keith D. Miller
• Helpful suggestion   Keith D. Miller
• LED lights   Ross Myers
• HELP VN WRONG POLARITY!   Ross Myers
• Diacom didn't work on another car....   Ross Myers
• anyone have any runners ?   Ross Myers
• Manual Idle tweaking   Ross Myers
• Manual Idle tweaking   Ross Myers
• Remote EPROM   Scott Pearson
• RPM limits of GM computer/ignition module?   Gerald Pelnar
• cs 453 group buy now closed.   Marc Piccioni
• limited efi << 400 block 2 bolt main for sale   Marc Piccioni
• Mysterious black box id...   Marc Piccioni
• intermittent '747 problem   Marc Piccioni
• intermittent '747 problem   Marc Piccioni
• anyone have any runners ?   Marc Piccioni
• performance parts limited EFI content   Marc Piccioni
• CS453 group buy   Marc Piccioni
• limited efi - performance parts   Marc Piccioni
• Quick question on GM truck PCM ALDL lines   Bruce Plecan
• MAFs   Bruce Plecan
• Running 8 low impedence injectors on GM ECM using an auxilliary injector driver?   Bruce Plecan
• 383 TPI Dyno runs   Bruce Plecan
• GM TPS to Ford throttle body   Bruce Plecan
• GMECM Digest V2 #780   Bruce Plecan
• Knock Sensor Light and Alarm problems...   Bruce Plecan
• Knock Sensor Light and Alarm problems...   Bruce Plecan
• ecm test bench   Bruce Plecan
• Intronics Emulator   Bruce Plecan
• The count is in...   Bruce Plecan
• The count is in...   Bruce Plecan
• The count is in...   Bruce Plecan
• tbi injector install question   Bruce Plecan
• Halp BBC Tuned port manifold   Bruce Plecan
• Remote EPROM   Bruce Plecan
• Remote EPROM   Bruce Plecan
• 165 $6E cold idle   Bruce Plecan
• Plena volume   Bruce Plecan
• Cherry Semiconductors Group buy   Bruce Plecan
• 165 $6E cold idle   Bruce Plecan
• Plena volume   Bruce Plecan
• Fw: checking up   Bruce Plecan
• Fw: The Revolutionary BXR Manifold!   Bruce Plecan
• Next round of viruses?   Bruce Plecan
• Fw: checking up   Bruce Plecan
• Plena volume   Bruce Plecan
• The Revolutionary BXR Manifold!   Bruce Plecan
• Blown 350 with 1227730 ECM   Bruce Plecan
• '165 Minimum Air Question...   Bruce Plecan
• 165 ECU File   Bruce Plecan
• 165 ECU File   Bruce Plecan
• Near WideBand O2 sensory (Greddy)   Bruce Plecan
• Blown 350 with 1227730 ECM   Bruce Plecan
• About the greedy WB   Bruce Plecan
• '165 Minimum Air Question...   Bruce Plecan
• '165 Minimum Air Question...   Bruce Plecan
• GMECM Digest V2 #792   Bruce Plecan
• NTK sensor was RE: GMECM Digest V2 #792   Bruce Plecan
• dats a lotsa bins!   Bruce Plecan
• dats a lotsa bins!   Bruce Plecan
• Remember trace detonation, headgaskets and bearings   Bruce Plecan
• dats a lotsa bins!   Bruce Plecan
• Profiteers   Bruce Plecan
• Remember trace detonation, headgaskets and bearings   Bruce Plecan
• Profiteers   Bruce Plecan
• Later MAFs   Bruce Plecan
• dats a lotsa bins!   Bruce Plecan
• Adjustable VSSB   Bruce Plecan
• Blown 350 with 1227730 ECM   Bruce Plecan
• Blown 350 with 1227730 ECM   Bruce Plecan
• Fw: more on netres   Bruce Plecan
• Later MAFs   Bruce Plecan
• ECM 1227748, creating a new ECU file?   Bruce Plecan
• Blown 350 with 1227730 ECM   Bruce Plecan
• VE2 all zeros...?   Bruce Plecan
• Hondo WB O2 and PCV valve   Bruce Plecan
• Blown 350 with 1227730 ECM   Bruce Plecan
• 747 newbie question   Bruce Plecan
• Blown 350 with 1227730 ECM   Bruce Plecan
• anyone have any runners ?   Bruce Plecan
• RPM limits of GM computer/ignition module?   Bruce Plecan
• Blown 350 with 1227730 ECM   Bruce Plecan
• Blown 350 with 1227730 ECM   Bruce Plecan
• RPM limits of GM computer/ignition module?   Bruce Plecan
• 1227148 to 1227749 conversion?   Bruce Plecan
• 1227148 to 1227749 conversion?   Bruce Plecan
• 1227148 to 1227749 conversion?   Bruce Plecan
• Blown 350 with 1227730 ECM   Bruce Plecan
• RPM limits of GM computer/ignition module?   Bruce Plecan
• 1227730 with 2 bar Map?   Bruce Plecan
• application info?   Bruce Plecan
• Mystery O2 sensor   Bruce Plecan
• lean cruise   Bruce Plecan
• Mechanical end of K/S tests   Bruce Plecan
• Felpro 1010s   Bruce Plecan
• 1227148 to 1227749 conversion?   Bruce Plecan
• diy-EGOR   Bruce Plecan
• A standard defition format for ECMs, with LT1 as an example   Dave Plummer
• A standard defition format for ECMs, with LT1 as an example   Dave Plummer
• ECM for '95 5.7 Yukon?   Programmer
• AKFM in 730   Programmer
• The count is in...   Programmer
• Injector ID help please   Programmer
• AKFM in 730   Programmer
• '165 Minimum Air Question...   Programmer
• Blown 350 with 1227730 ECM   Programmer
• Emulator + Editor ?????   Programmer
• '165 Minimum Air Question...   Programmer
• s-10 idle ( was '165 Minimum Air Question...)   Programmer
• piston identification   Programmer
• A standard defition format for ECMs, with LT1 as an example   Programmer
• dats a lotsa bins!   Programmer
• anyone have any runners ?   Programmer
• anyone have any runners ?   Programmer
• RPM limits of GM computer/ignition module?   Programmer
• Manual Idle tweaking   Programmer
• Pic driven UEGO   The Punisher
• Mystery O2 sensor   The Punisher
• anyone have any runners ?   Red86
• Intronics Emulator   Mark S. Riley
• Emulators, EconoRom III   Mark S. Riley
• Emulators, EconoRom III   Mark S. Riley
• Emulators, EconoRom III   Mark S. Riley
• Helpful suggestion   Mark S. Riley
• Helpful suggestion   Mark S. Riley
• 383 TPI Dyno runs   Romans, Mark
• 383 TPI Dyno runs   Romans, Mark
• Remote EPROM   Romans, Mark
• 165 $6E cold idle   Romans, Mark
• The Revolutionary BXR Manifold!   Romans, Mark
• '165 Minimum Air Question...(Round 2)   Romans, Mark
• ECM 1227748, creating a new ECU file?   Romans, Mark
• Adjustable VSSB   Romans, Mark
• lean cruise   Romans, Mark
• Helpful suggestion   Romans, Mark
• Manual Idle tweaking   Romans, Mark
• Manual Idle tweaking   Romans, Mark
• Quick question on GM truck PCM ALDL lines   Steve Ruse
• Profiteers   Len Sabatine
• Profiteers   Len Sabatine
• anyone have any runners ?   Len Sabatine
• Adjustable VSSB   Len Sabatine
• Adjustable VSSB   Len Sabatine
• Adjustable VSSB   Len Sabatine
• Mechanical end of K/S tests   Len Sabatine
• 98 Vs 94 4L60E   Len Sabatine
• 98 Vs 94 4L60E   Len Sabatine
• 98 Vs 94 4L60E   Len Sabatine
• Chevy Block   Tom Sharpe
• Donor found!   Bill Shaw
• Blown 350 with 1227730 ECM   Bill Shaw
• Turbo Selection   Bill Shaw
• Emulator + Editor ?????   Walter Sherwin
• ecu files for a TR 1227148 ECM?   Drew Skinner
• ecu files for a TR 1227148 ECM?   Drew Skinner
• 1227148 to 1227749 conversion?   Drew Skinner
• 1227148 to 1227749 conversion?   Drew Skinner
• 1227148 to 1227749 conversion?   Drew Skinner
• 1227148 to 1227749 conversion?   Drew Skinner
• Programmers and emulators   Drew Skinner
• Programmers and emulators   Drew Skinner
• Cherry Semiconductors Group buy   DC Smith
• Suitable Cross for the Cherry drivers?   DC Smith
• Accel Linear O2 sensor   DC Smith
• Removing A/C from a 730 vehicle   Squash
• Emulator + Editor ?????   TK
• Emulator + Editor ?????   TK
• Blown 350 with 1227730 ECM   TK
• ECM 1227748, creating a new ECU file?   TK
• RPM limits of GM computer/ignition module?   TK
• RPM limits of GM computer/ignition module?   TK
• diy-EGOR   Barry Tisdale
• 165 ECU File   Dan Townsend
• 165 ECU File   Dan Townsend
• Next round of viruses?   Dan Townsend
• Blown 350 with 1227730 ECM   Dan Townsend
• Blown 350 with 1227730 ECM   Dan Townsend
• Blown 350 with 1227730 ECM   Dan Townsend
• '165 Minimum Air Question...   Dan Townsend
• Blown 350 with 1227730 ECM   Dan Townsend
• '165 Minimum Air Question...(Round 2)   Dan Townsend
• '165 Minimum Air Question...   Dan Townsend
• Removing A/C from a 730 vehicle   Dan Townsend
• Bin Library   Dan Townsend
• Blown 350 with 1227730 ECM   Dan Townsend
• Blown 350 with 1227730 ECM   Dan Townsend
• Blown 350 with 1227730 ECM   Dan Townsend
• Blown 350 with 1227730 ECM   Dan Townsend
• Blown 350 with 1227730 ECM   Dan Townsend
• Blown 350 with 1227730 ECM   Dan Townsend
• Blown 350 with 1227730 ECM   Dan Townsend
• anyone have any runners ?   Dan Townsend
• 1227148 to 1227749 conversion?   Dan Townsend
• 1227730 with 2 bar Map?   Dan Townsend
• 1227148 to 1227749 conversion?   Dan Townsend
• 1227730 with 2 bar Map?   Dan Townsend
• 165 ECU File   Dan Townsend
• TPI fuel pressure   Dan Townsend
• TPI fuel pressure   Dan Townsend
• TPI fuel pressure   Dan Townsend
• recommended eprom speeds   Dan Townsend
• Helpful suggestion   Mike Turner/ENGR/HQ/KEMET/US
• Near WideBand O2 sensory (Greddy)   David Tuschhoff
• AKFM in 730   Bob Valentine
• Eprom Programmer and Pic Programmer   Bob Valentine
• Cherry Semiconductors Group buy   Bob Valentine
• VSS buffer location   Bob Valentine
• '165 Minimum Air Question...   Bob Valentine
• Remember trace detonation, headgaskets and bearings   Bob Valentine
• Earnhardt past away   Bob Valentine
• Adjustable VSSB   Bob Valentine
• anyone have any runners ?   Bob Valentine
• GMECM Digest V2 #807   Bob Valentine
• Helpful suggestion   Bob Valentine
• Helpful suggestion   Bob Valentine
• New way to tune GM VE tables?   Richard Wakeling
• GM TPS to Ford throttle body   Richard Wakeling
• GMECM Digest V2 #792   Richard Wakeling
• New way to tune GM VE tables?   Zak - Andrew Wakeling
• Harness?   Rex Weatherford
• Cheap Shift Light   Rex Weatherford
• Knock Sensor Light and Alarm problems...   Rex Weatherford
• Knock Sensor Light and Alarm problems...   Rex Weatherford
• Knock Sensor Light and Alarm problems...   Rex Weatherford
• Knock Sensor Light and Alarm problems...   Rex Weatherford
• Howell RPM reference   Jason Weir
• Howell RPM reference   Jason Weir
• Emulator + Editor ?????   Jason Weir
• Adjustable VSSB   Mike Wesley
• Adjustable VSSB   Mike Wesley
• Adjustable VSSB   Mike Wesley
• Adjustable VSSB   Mike Wesley
• TPI fuel pressure   Greg Westphal
• 383 TPI Dyno runs   Dave Williams
• Plena volume   Dave Williams
• 16168625 ECM   Dave Williams
• 165 $6E cold idle   Bob Wooten
• 165 $6E cold idle   Bob Wooten
• 165 $6E cold idle   Bob Wooten
• '165 Minimum Air Question...   Bob Wooten
• '165 Minimum Air Question...   Bob Wooten
• '165 Minimum Air Question...   Bob Wooten
• '165 Minimum Air Question...   Bob Wooten
• dats a lotsa bins!   Bob Wooten
• '165 Minimum Air Question...   Bob Wooten
• dats a lotsa bins!   Bob Wooten
• Near WideBand O2 sensory (Greddy)   Bob Wooten
• anyone have any runners ?   Bob Wooten
• 1227730 with 2 bar Map?   Bob Wooten
• Turbo Project update. The good, bad and ugly.   Dave Zug
• 383 TPI Dyno runs   Dave Zug
• 383 TPI Dyno runs   Dave Zug
• 383 TPI Dyno runs   Dave Zug
• About the greedy WB   Dave Zug
• A standard defition format for ECMs, with LT1 as an example   Dave Zug
• A standard defition format for ECMs, with LT1 as an example   Dave Zug
• dats a lotsa bins!   Dave Zug.
• New way to tune GM VE tables?   Dave Zug.
• TPI fuel pressure   Bja1078 at aol.com
• Need help in NH   BogHog1 at aol.com
• Need help in NH   BogHog1 at aol.com
• ECM for '95 5.7 Yukon?   BogHog1 at aol.com
• s-10 idle ( was '165 Minimum Air Question...)   BogHog1 at aol.com
• Adjustable VSSB   BogHog1 at aol.com
• Adjustable VSSB   BogHog1 at aol.com
• Adjustable VSSB   BogHog1 at aol.com
• Adjustable VSSB   BogHog1 at aol.com
• Adjustable VSSB   BogHog1 at aol.com
• Quick question on GM truck PCM ALDL lines   Chipsbyal at aol.com
• Quick question on GM truck PCM ALDL lines   Chipsbyal at aol.com
• Need help in NH   Chipsbyal at aol.com
• ECM for '95 5.7 Yukon?   Chipsbyal at aol.com
• VSS buffer location   Chipsbyal at aol.com
• Running 8 low impedence injectors on GM ECM using an auxilliary injector ...   ECMnut at aol.com
• Blown 350 with 1227730 ECM   ECMnut at aol.com
• A standard defition format for ECMs, with LT1 as an example   ECMnut at aol.com
• Earnhardt past away   ECMnut at aol.com
• Blown 350 with 1227730 ECM   ECMnut at aol.com
• Blown 350 with 1227730 ECM   ECMnut at aol.com
• 1227148 to 1227749 conversion?   ECMnut at aol.com
• 1227148 to 1227749 conversion?   ECMnut at aol.com
• 1227148 to 1227749 conversion?   ECMnut at aol.com
• Helpful suggestion   ECMnut at aol.com
• Helpful suggestion   ECMnut at aol.com
• Fw: checking up   JTesta1966 at aol.com
• P4 ECM #1227748 questions   JTesta1966 at aol.com
• 2732A EPROM problem   JTesta1966 at aol.com
• Remember trace detonation, headgaskets and bearings   KasaRyan at aol.com
• felpro 1010s and 8625 software   KasaRyan at aol.com
• 94 Buick LeSabre ALDL Pinouts   Mikepoore at aol.com
• '165 Minimum Air Question...   OneSS2NV at aol.com
• '165 Minimum Air Question...(Round 2)   OneSS2NV at aol.com
• '165 Minimum Air Question...(Round 2)   OneSS2NV at aol.com
• Mysterious black box id...   Rexdina at aol.com
• The count is in...   Tedscj at aol.com
• VSS and idle   Tedscj at aol.com
• New way to tune GM VE tables?   WEG1192 at aol.com
• MAFs   WEG1192 at aol.com
• tbi injector install question   WEG1192 at aol.com
• Howell RPM reference   WEG1192 at aol.com
• Howell RPM reference   WEG1192 at aol.com
• Information on EFI Org   WEG1192 at aol.com
• 2732A EPROM problem   WEG1192 at aol.com
• 2732A EPROM problem   WEG1192 at aol.com
• 2732A EPROM problem   WEG1192 at aol.com
• RPM limits of GM computer/ignition module?   rahmrh at cableone.net
• Remote EPROM   sapearso at collins.rockwell.com
• GMECM Digest V2 #792   sapearso at collins.rockwell.com
• Mysterious black box id...   sapearso at collins.rockwell.com
• Next round of viruses?   LSINGH46 at cs.com
• VE2 all zeros...?   den Broeder, Ernst
• some table locations I found within 1227429 ECM prom   den Broeder, Ernst
• some table locations I found within 1227429 ECM prom   den Broeder, Ernst
• application info?   den Broeder, Ernst
• application info?   den Broeder, Ernst
• Programmers and emulators   den Broeder, Ernst
• Programmers and emulators   den Broeder, Ernst
• Knock Sensor Light and Alarm problems...   don.broadus at exeloncorp.com
• Knock Sensor Light and Alarm problems...   don.broadus at exeloncorp.com
• 383 TPI Dyno runs   timsiford at hushmail.com
• 383 TPI Dyno runs   timsiford at hushmail.com
• Near WideBand O2 sensory (Greddy)   timsiford at hushmail.com
• A standard defition format for ECMs, with LT1 as an example   timsiford at hushmail.com
• A standard defition format for ECMs, with LT1 as an example   timsiford at hushmail.com
• Removing A/C from a 730 vehicle   timsiford at hushmail.com
• dats a lotsa bins!   timsiford at hushmail.com
• Knock Sensor Light and Alarm problems...   jkooser at impsat.com
• Retiring Dale Earnhardt's Number Three   jkooser at impsat.com
• Blown 350 with 1227730 ECM   jkooser at impsat.com
• Hondo WB O2 and PCV valve   bcroe at juno.com
• Hondo WB O2 Pinout   bcroe at juno.com
• 2732A EPROM problem   bcroe at juno.com
• diy-EGOR   bcroe at juno.com
• TPI fuel pressure   inter7 at mail.delanet.com
• TPI fuel pressure   inter7 at mail.delanet.com
• TPI fuel pressure   inter7 at mail.delanet.com
• TPI fuel pressure   inter7 at mail.delanet.com
• TPI fuel pressure   inter7 at mail.delanet.com
• Testing 808 w/o engine/car -- was cooked VN   black maj
• 165 $6E cold idle   rrauscher at nni.com
• EGOR, was:Re: GMECM Digest V2 #792   rrauscher at nni.com
• 1227730 with 2 bar Map?   rrauscher at nni.com
• Need help   lunapark at perigee.net
• Blown 350 with 1227730 ECM   chetwagner at qwest.net
• Howell RPM reference   chetwagner at qwest.net
• Blown 350 with 1227730 ECM   chetwagner at qwest.net
• Turbo Selection   chetwagner at qwest.net
• TBI injector picture and info   steve ravet
• '88 Corvette Binary & Archives   steve ravet
• dats a lotsa bins!   steve ravet
• ECM 1227748, creating a new ECU file?   steve ravet
• ECM 1227748, creating a new ECU file?   steve ravet
• 747 newbie question   steve ravet
• 1228746   rr
• 165 $6E cold idle   rr
• GM 747 EPROM   rr
• '165 Minimum Air Question...   rr
• Removing A/C from a 730 vehicle   rr
• GMECM Digest V2 #792   rr
• P4 ECM #1227748 questions   rr
• P4 ECM #1227748 questions   rr
• Lockers update   rr
• intermittent '747 problem   rr
• Blown 350 with 1227730 ECM   rr
• diy-egor   rr
• Blown 350 with 1227730 ECM   rr
• Blown 350 with 1227730 ECM   rr
• GMECM Digest V2 #807   rr
• 1227148 to 1227749 conversion?   rr
• 1227148 to 1227749 conversion?   rr
• 1227148 to 1227749 conversion?   rr
• MAF with 747? 730? or any other later ecm?   rr
• lean cruise   rr
• lean cruise   rr
• lean cruise   rr
• diy-EGOR   rr
• TPI fuel pressure   slowfatslug
• GM 747 EPROM   Mika.Helander at softbit.fi
• intermittent '747 problem   Mika.Helander at softbit.fi
• piston identification   DianeS at speakeasy.org
• piston identification   DianeS at speakeasy.org
• beginners info   DianeS at speakeasy.org
• anyone have any runners ?   DianeS at speakeasy.org
• Emulators, EconoRom III   spidy
• 98 Vs 94 4L60E   washburn
• The count is in...   ae2598 at wayne.edu
• Need help   ae2598 at wayne.edu
• Next round of viruses?   ae2598 at wayne.edu
• A standard defition format for ECMs, with LT1 as an example   ae2598 at wayne.edu
• A standard defition format for ECMs, with LT1 as an exampl   ae2598 at wayne.edu
• dats a lotsa bins!   ae2598 at wayne.edu
• dats a lotsa bins!   ae2598 at wayne.edu
• Adjustable VSSB   ae2598 at wayne.edu
• Adjustable VSSB   ae2598 at wayne.edu
• Blown 350 with 1227730 ECM   ae2598 at wayne.edu
• Blown 350 with 1227730 ECM   ae2598 at wayne.edu
• Blown 350 with 1227730 ECM   ae2598 at wayne.edu
• Blown 350 with 1227730 ECM   ae2598 at wayne.edu
• Blown 350 with 1227730 ECM   ae2598 at wayne.edu
• Vette injectors FS   ae2598 at wayne.edu
• Adjustable VSSB   ae2598 at wayne.edu
• Helpful suggestion   ae2598 at wayne.edu

Last message date: Wed Feb 28 22:43:00 GMT 2001
Archived on: Thu May 30 05:42:39 GMT 2013

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...