Blown 350 with 1227730 ECM

[Jon Fedock]

Cool project :) :) I happen to have a weakness for the third generation
firebirds (I own a few) myself. I'm sure by now someone has given you the
link to the ftp site for the p4 doc.
Jon
86 Trans Am Twin Turbo 350
87 Firebird Formula 350
88 Pro Am (Wife's car)
89 GTA
91 Firebird 305 T-5

----- Original Message -----
From: Dan Townsend <xybertron at cox-internet.com>
To: <gmecm at diy-efi.org>
Sent: Tuesday, February 20, 2001 12:30 AM
Subject: Re: Blown 350 with 1227730 ECM


: It is going in a 87 Trans Am GTA.  I'm looking to have a blown 355 in the
: end with an aftermarket intake, vette or AFR heads, forged piston, blower
: friendly cam and probably a slightly better than stock crank.  Then all
the
: little sutff that goes with all that.  Then I'm thinking of backing it
with
: a T-56 from a 94-97 F-body and then a 12 bolt rear or 9 inch depending on
: what I find first.  I've got the suspension basically done and now I wanna
: go fast :-)  I verified this weekend that I can still drive a stick so it
: should all be done this year if I just get one of the jobs that I'm
: interviewing for.
:
: BTW - Could you send me the turbo p4 document you speak of?  I'll have the
: ecu on the site when I finish it.  Shouldn't take too long since I spend
: 8-12 hours a day on car stuff.
:
: DanT
:
: ----- Original Message -----
: From: "Jon Fedock" <heh at youwish.com>
: To: <gmecm at diy-efi.org>
: Sent: Monday, February 19, 2001 10:59 PM
: Subject: Re: Blown 350 with 1227730 ECM
:
:
: > Not a true hack like the 165 and 730. The turbo p4 document is for syty
: > code, but no locations. Programmer is locations withut good
descriptions.
: > Put the two together and you get what you NEED to make something run. ;)
: > What is this going in?
: > Jon
: >
: > ----- Original Message -----
: > From: Dan Townsend <xybertron at cox-internet.com>
: > To: <gmecm at diy-efi.org>
: > Sent: Monday, February 19, 2001 11:22 PM
: > Subject: Re: Blown 350 with 1227730 ECM
: >
: >
: > : Is there a hack for the 749?  Promgrammer is kinda confusing since it
: > : doesn't show the tables that well IMHO.
: > :
: > : FWIW - I'll use the hack to make a ecu for Winbin users like me.
: > :
: > : Thanks,
: > : Dan
:
: --------------------------------------------------------------------------
--
: To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
: in the body of a message (not the subject) to majordomo at lists.diy-efi.org
:
:


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org