February 2001 Archives by date
Starting: Thu Feb 1 00:13:49 GMT 2001
Ending: Wed Feb 28 22:43:00 GMT 2001
Messages: 615
- GM Fuel Pump control scheme
Louis Baiani
- Testing 808 w/o engine/car -- was cooked VN
Roger Merritt
- Testing 808 w/o engine/car -- was cooked VN
black maj
- Quick question on GM truck PCM ALDL lines
Chipsbyal at aol.com
- Turbo Project update. The good, bad and ugly.
Jon Fedock
- Turbo Project update. The good, bad and ugly.
Jon Fedock
- Turbo Project update. The good, bad and ugly.
Jon Fedock
- Turbo Project update. The good, bad and ugly.
Jon Fedock
- Quick question on GM truck PCM ALDL lines
Steve Ruse
- Quick question on GM truck PCM ALDL lines
Bruce Plecan
- Quick question on GM truck PCM ALDL lines
Shannen Durphey
- Turbo Project update. The good, bad and ugly.
Jon Fedock
- Turbo Project update. The good, bad and ugly.
Jake Kooser
- Quick question on GM truck PCM ALDL lines
Chipsbyal at aol.com
- Turbo Project update. The good, bad and ugly.
Dave Zug
- LED lights
Ross Myers
- New way to tune GM VE tables?
WEG1192 at aol.com
- Memcal Schematics/Resistor Packs?
Justin Albury
- New way to tune GM VE tables?
Richard Wakeling
- New way to tune GM VE tables?
Zak - Andrew Wakeling
- 1228746
Ludis Langens
- MAFs
Bruce Plecan
- Update: Closed Loop Disable in $6E
Shannen Durphey
- MAFs
WEG1192 at aol.com
- TBI injector picture and info
steve ravet
- 383 TPI Dyno runs
timsiford at hushmail.com
- Need help in NH
Chipsbyal at aol.com
- EFI POWWOW
Jeremy Gonyou
- MAFs
Jake Kooser
- 383 TPI Dyno runs
Dave Zug
- another 'tuning' suggestion...
Edward J. Malkiewicz
- MAFs
Ludis Langens
- GM 808 .ECU file for VN/VP
Glenn D
- '94 Jimmy 4.3L and Diacom
Marteney, Steven J.
- 1228746
rr
- Need help in NH
BogHog1 at aol.com
- Need help in NH
Mitch Louole
- Running 8 low impedence injectors on GM ECM using an auxilliary injector driver?
Jason R. Haines
- Need help in NH
BogHog1 at aol.com
- T56 Questions... was : Re: Document re-uploaded
Jim and Sharon Brady
- Running 8 low impedence injectors on GM ECM using an auxilliary injector driver?
Bruce Plecan
- Harness?
Rex Weatherford
- 383 TPI Dyno runs
Romans, Mark
- 383 TPI Dyno runs
Dave Williams
- Interesting bulletin regarding O2 + exhaust
Shannen Durphey
- TBI injectors (just humor)
Shannen Durphey
- Running 8 low impedence injectors on GM ECM using an auxilliary injector ...
ECMnut at aol.com
- 383 TPI Dyno runs
Dave Zug
- 383 TPI Dyno runs
Dave Zug
- 383 TPI Dyno runs
Bruce Plecan
- 383 TPI Dyno runs
Romans, Mark
- HELP VN WRONG POLARITY!
Ross Myers
- HELP VN WRONG POLARITY!
Glenn D
- GM TPS to Ford throttle body
Glenn D
- GM TPS to Ford throttle body
Daniel Collins
- GM TPS to Ford throttle body
Bruce Plecan
- GMECM Digest V2 #780
Dig
- Cheap Shift Light
Rex Weatherford
- Knock Sensor Light and Alarm problems...
Rex Weatherford
- GMECM Digest V2 #780
Bruce Plecan
- Knock Sensor Light and Alarm problems...
don.broadus at exeloncorp.com
- 383 TPI Dyno runs
timsiford at hushmail.com
- Knock Sensor Light and Alarm problems...
Bruce Plecan
- The count is in...
Andrew McRory
- Knock Sensor Light and Alarm problems...
don.broadus at exeloncorp.com
- GM TPS to Ford throttle body
Glenn D
- GM TPS to Ford throttle body
Richard Wakeling
- 165 ECU File
Marteney, Steven J.
- 165 ECU File
Dan Townsend
- 165 ECU File
Marteney, Steven J.
- Knock Sensor Light and Alarm problems...
Bruce Plecan
- ECM for '95 5.7 Yukon?
Reid Bishop
- ECM for '95 5.7 Yukon?
BogHog1 at aol.com
- GM TPS to Ford throttle body
Shannen Durphey
- The count is in...
Tedscj at aol.com
- ECM for '95 5.7 Yukon?
Programmer
- GM TPS to Ford throttle body
Glenn D
- Diacom didn't work on another car....
Ross Myers
- ecm test bench
Daniel Collins
- 165 ECU File
Marteney, Steven J.
- 165 ECU File
Marteney, Steven J.
- 165 $6E MAF scalar
Marteney, Steven J.
- Knock Sensor Light and Alarm problems...
Rex Weatherford
- Knock Sensor Light and Alarm problems...
jkooser at impsat.com
- Knock Sensor Light and Alarm problems...
Rex Weatherford
- 165 ECU File
Dan Townsend
- ecm test bench
Bruce Plecan
- Intronics Emulator
Mark S. Riley
- Intronics Emulator
Bruce Plecan
- Need help
lunapark at perigee.net
- Need help
Jeremy Gonyou
- Knock Sensor Light and Alarm problems...
Ludis Langens
- Knock Sensor Light and Alarm problems...
Jake Kooser
- 165 $6E MAF scalar
Daniel E. Griffin
- ecm test bench
Daniel Collins
- 165 $6E MAF scalar
Marteney, Steven J.
- Knock Sensor Light and Alarm problems...
Rex Weatherford
- AKFM in 730
Tom Marracci
- The count is in...
Andrew McRory
- AKFM in 730
Bob Valentine
- Eprom Programmer and Pic Programmer
Peter Fenske
- Eprom Programmer and Pic Programmer
Bob Valentine
- The count is in...
Mitch Louole
- tbi injector install question
Alain Blais
- AKFM in 730
Programmer
- The count is in...
Bruce Plecan
- The count is in...
Keith D. Miller
- The count is in...
Bruce Plecan
- The count is in...
Keith D. Miller
- The count is in...
Bruce Plecan
- tbi injector install question
Bruce Plecan
- tbi injector install question
WEG1192 at aol.com
- The count is in...
Programmer
- The count is in...
ae2598 at wayne.edu
- The count is in...
Andrew McRory
- Injector ID help please
Andrew McRory
- cs 453 group buy now closed.
Marc Piccioni
- '88 Corvette Binary & Archives
Scott Fraser
- '88 Corvette Binary & Archives
Shannen Durphey
- Cheap Shift Light
Alain Blais
- limited efi << 400 block 2 bolt main for sale
Marc Piccioni
- Injector ID help please
Programmer
- Injector ID help please
Andrew McRory
- Halp BBC Tuned port manifold
Peter Fenske
- Injector ID help please
Peter Fenske
- Knock Sensor Light and Alarm problems...
Robert W. Hughes
- Palm interface for the '7747
Reid Bishop
- Halp BBC Tuned port manifold
Bruce Plecan
- ECM for '95 5.7 Yukon?
Reid Bishop
- ECM for '95 5.7 Yukon?
Chipsbyal at aol.com
- ECM for '95 5.7 Yukon?
Reid Bishop
- The count is in...
Ludis Langens
- AKFM in 730
Ludis Langens
- Palm interface for the '7747
Ludis Langens
- Remote EPROM
sapearso at collins.rockwell.com
- Remote EPROM
Bruce Plecan
- 165 $6E cold idle
Marteney, Steven J.
- AKFM in 730
Programmer
- Remote EPROM
Romans, Mark
- 165 $6E cold idle
Romans, Mark
- 165 $6E cold idle
Marteney, Steven J.
- Remote EPROM
Bruce Plecan
- 165 $6E cold idle
Bruce Plecan
- '88 Corvette Binary & Archives
steve ravet
- '88 Corvette Binary & Archives
Scott Fraser
- Plena volume
Bruce Plecan
- Cherry Semiconductors Group buy
Bruce Plecan
- Cherry Semiconductors Group buy
DC Smith
- 165 $6E cold idle
Bob Wooten
- Cherry Semiconductors Group buy
Bob Valentine
- Remote EPROM
Christian Hack
- Looking for a date for the gmecm eeprom
Ludis Langens
- Donor found!
Ludis Langens
- Need help
Ludis Langens
- Need help
ae2598 at wayne.edu
- Plena volume
Dave Williams
- 165 $6E cold idle
Bruce Plecan
- Plena volume
Bruce Plecan
- Fw: checking up
Bruce Plecan
- Fw: checking up
JTesta1966 at aol.com
- Fw: checking up
Peter Fenske
- Fw: The Revolutionary BXR Manifold!
Bruce Plecan
- Next round of viruses?
ae2598 at wayne.edu
- Next round of viruses?
Bruce Plecan
- Fw: checking up
Bruce Plecan
- 165 $6E cold idle
rr
- Next round of viruses?
Shannen Durphey
- Plena volume
Shannen Durphey
- Next round of viruses?
LSINGH46 at cs.com
- Plena volume
Bruce Plecan
- Next round of viruses?
Dan Townsend
- The Revolutionary BXR Manifold!
Romans, Mark
- Cherry Semiconductors Group buy
Carl Ijames
- Remote EPROM
Jeffery Green
- Remote EPROM
Scott Pearson
- The Revolutionary BXR Manifold!
Bruce Plecan
- Blown 350 with 1227730 ECM
Dan Townsend
- Blown 350 with 1227730 ECM
Bruce Plecan
- Blown 350 with 1227730 ECM
ECMnut at aol.com
- '165 Minimum Air Question...
OneSS2NV at aol.com
- Howell RPM reference
WEG1192 at aol.com
- Blown 350 with 1227730 ECM
chetwagner at qwest.net
- Howell RPM reference
Jason Weir
- Blown 350 with 1227730 ECM
Dan Townsend
- Blown 350 with 1227730 ECM
Dan Townsend
- '165 Minimum Air Question...
Dan Townsend
- Howell RPM reference
WEG1192 at aol.com
- 165 $6E cold idle
Bob Wooten
- '165 Minimum Air Question...
Shannen Durphey
- 165 $6E cold idle
Bob Wooten
- Blown 350 with 1227730 ECM
Dan Townsend
- '165 Minimum Air Question...
Bob Wooten
- '165 Minimum Air Question...
Shannen Durphey
- '165 Minimum Air Question...
Bob Wooten
- VSS buffer location
Bob Valentine
- '165 Minimum Air Question...
Programmer
- Need help
Ludis Langens
- 165 $6E cold idle
rrauscher at nni.com
- '165 Minimum Air Question...
Shannen Durphey
- '165 Minimum Air Question...
Bruce Plecan
- VSS buffer location
Chipsbyal at aol.com
- 165 ECU File
Marteney, Steven J.
- 165 ECU File
Marteney, Steven J.
- 165 ECU File
Bruce Plecan
- Near WideBand O2 sensory (Greddy)
timsiford at hushmail.com
- 165 ECU File
Marteney, Steven J.
- 165 ECU File
Bruce Plecan
- Near WideBand O2 sensory (Greddy)
Bruce Plecan
- GM 747 EPROM
Jove Malcolm
- Blown 350 with 1227730 ECM
Jon Fedock
- Blown 350 with 1227730 ECM
Jon Fedock
- Blown 350 with 1227730 ECM
Bruce Plecan
- About the greedy WB
Bruce Plecan
- '165 Minimum Air Question...
Kevin Crain
- '165 Minimum Air Question...
Bob Valentine
- Howell RPM reference
Jason Weir
- '165 Minimum Air Question...
Bruce Plecan
- Emulator + Editor ?????
Eric Aos
- Blown 350 with 1227730 ECM
Programmer
- VSS and idle
Tedscj at aol.com
- Emulator + Editor ?????
Programmer
- GM 747 EPROM
rr
- '165 Minimum Air Question...
rr
- Emulator + Editor ?????
Walter Sherwin
- Emulator + Editor ?????
TK
- Emulator + Editor ?????
Jason Weir
- VSS buffer location
Shannen Durphey
- '165 Minimum Air Question...(Round 2)
OneSS2NV at aol.com
- GMECM Digest V2 #792
sapearso at collins.rockwell.com
- Mysterious black box id...
Shannen Durphey
- Howell RPM reference
chetwagner at qwest.net
- '165 Minimum Air Question...(Round 2)
Romans, Mark
- '165 Minimum Air Question...
Bob Wooten
- '165 Minimum Air Question...
Shannen Durphey
- '165 Minimum Air Question...(Round 2)
Dan Townsend
- '165 Minimum Air Question...(Round 2)
Shannen Durphey
- '165 Minimum Air Question...
Dan Townsend
- Mysterious black box id...
sapearso at collins.rockwell.com
- Mysterious black box id...
Marc Piccioni
- Emulator + Editor ?????
TK
- GM 747 EPROM
Mika.Helander at softbit.fi
- Mysterious black box id...
Rexdina at aol.com
- GM 747 EPROM
Ludis Langens
- '165 Minimum Air Question...
Ludis Langens
- '165 Minimum Air Question...
Bruce Plecan
- '165 Minimum Air Question...
Programmer
- EGOR, was:Re: GMECM Digest V2 #792
rrauscher at nni.com
- s-10 idle ( was '165 Minimum Air Question...)
Shannen Durphey
- GMECM Digest V2 #792
Bruce Plecan
- NTK sensor was RE: GMECM Digest V2 #792
JimSloan
- NTK sensor was RE: GMECM Digest V2 #792
Bruce Plecan
- s-10 idle ( was '165 Minimum Air Question...)
Programmer
- piston identification
DianeS at speakeasy.org
- A standard defition format for ECMs, with LT1 as an example
Dave Plummer
- s-10 idle ( was '165 Minimum Air Question...)
Shannen Durphey
- s-10 idle ( was '165 Minimum Air Question...)
BogHog1 at aol.com
- piston identification
Shannen Durphey
- piston identification
DianeS at speakeasy.org
- Off topic: Injectors Wanted
Jeremy Gonyou
- piston identification
Greg Hermann
- piston identification
Programmer
- A standard defition format for ECMs, with LT1 as an example
ae2598 at wayne.edu
- GMECM Digest V2 #792
Richard Wakeling
- '165 Minimum Air Question...
Bob Wooten
- About the greedy WB
Dave Zug
- Information on EFI Org
Joseph & Melissa Guthrie
- Information on EFI Org and a completely unrelated matter
Allan Langford
- A standard defition format for ECMs, with LT1 as an example
Dave Zug
- Information on EFI Org
WEG1192 at aol.com
- P4 ECM #1227748 questions
Nick McAlpin
- A standard defition format for ECMs, with LT1 as an example
Dave Zug
- P4 ECM #1227748 questions
Ludis Langens
- A standard defition format for ECMs, with LT1 as an example
ECMnut at aol.com
- A standard defition format for ECMs, with LT1 as an example
timsiford at hushmail.com
- Information on EFI Org
Marteney, Steven J.
- A standard defition format for ECMs, with LT1 as an example
Programmer
- A standard defition format for ECMs, with LT1 as an example
timsiford at hushmail.com
- A standard defition format for ECMs, with LT1 as an example
Marteney, Steven J.
- ecu files for a TR 1227148 ECM?
Drew Skinner
- P4 ECM #1227748 questions
Nick McAlpin
- ALDL link, carbytes?
Nick McAlpin
- Removing A/C from a 730 vehicle
timsiford at hushmail.com
- '165 Minimum Air Question...
Shannen Durphey
- Removing A/C from a 730 vehicle
Squash
- Removing A/C from a 730 vehicle
Jeremy Gonyou
- A standard defition format for ECMs, with LT1 as an exampl
ae2598 at wayne.edu
- A standard defition format for ECMs, with LT1 as an example
Dave Plummer
- A standard defition format for ECMs, with LT1 as an exampl
Marteney, Steven J.
- Emulator + Editor ?????
Marteney, Steven J.
- A standard defition format for ECMs, with LT1 as an exampl
Eric Aos
- dats a lotsa bins!
steve ravet
- dats a lotsa bins!
Programmer
- Emulator + Editor ?????
Eric Aos
- dats a lotsa bins!
Dave Zug.
- dats a lotsa bins!
Craig Marcho
- dats a lotsa bins!
timsiford at hushmail.com
- A standard defition format for ECMs
Paul Blackmore
- dats a lotsa bins!
Bruce Plecan
- dats a lotsa bins!
ae2598 at wayne.edu
- dats a lotsa bins!
ae2598 at wayne.edu
- Removing A/C from a 730 vehicle
Dan Townsend
- Bin Library
Gabe
- Removing A/C from a 730 vehicle
rr
- GMECM Digest V2 #792
rr
- P4 ECM #1227748 questions
rr
- dats a lotsa bins!
Bruce Plecan
- P4 ECM #1227748 questions
JTesta1966 at aol.com
- Bin Library
Dan Townsend
- Bin Library
Gabe
- Remember trace detonation, headgaskets and bearings
KasaRyan at aol.com
- bin for 89 350 tpi 165
Chris Abreu
- Remember trace detonation, headgaskets and bearings
Bruce Plecan
- P4 ECM #1227748 questions
rr
- Remember trace detonation, headgaskets and bearings
Shannen Durphey
- ecu files for a TR 1227148 ECM?
Carl Ijames
- dats a lotsa bins!
Bob Wooten
- '165 Minimum Air Question...
Bob Wooten
- dats a lotsa bins!
Bruce Plecan
- Profiteers
Bruce Plecan
- P4 ECM #1227748 questions
Ludis Langens
- P4 ECM #1227748 questions
Nick McAlpin
- Profiteers
Len Sabatine
- ecu files for a TR 1227148 ECM?
Drew Skinner
- Profiteers
Andrew K. Mattei
- Profiteers
Kevin Crain
- Remember trace detonation, headgaskets and bearings
Bob Valentine
- Profiteers
Len Sabatine
- dats a lotsa bins!
Bob Wooten
- Remember trace detonation, headgaskets and bearings
Bruce Plecan
- Profiteers
Bruce Plecan
- Near WideBand O2 sensory (Greddy)
Bob Wooten
- dats a lotsa bins!
Ludis Langens
- Donor found!
Bill Shaw
- Later MAFs
Bruce Plecan
- Lockers update
rr
- dats a lotsa bins!
Bruce Plecan
- Blown 350 with 1227730 ECM
Jon Fedock
- Earnhardt past away
ECMnut at aol.com
- Earnhardt past away
Eric Aos
- Earnhardt past away
Shannen Durphey
- Earnhardt past away
Allan Langford
- Adjustable VSSB
BogHog1 at aol.com
- Earnhardt past away
Bob Valentine
- Adjustable VSSB
Bob Valentine
- Adjustable VSSB
Shannen Durphey
- Adjustable VSSB
Shannen Durphey
- Adjustable VSSB
BogHog1 at aol.com
- Adjustable VSSB
Bruce Plecan
- Adjustable VSSB
Shannen Durphey
- Adjustable VSSB
BogHog1 at aol.com
- Adjustable VSSB
BogHog1 at aol.com
- Adjustable VSSB
Shannen Durphey
- Blown 350 with 1227730 ECM
Jon Fedock
- intermittent '747 problem
Marc Piccioni
- Adjustable VSSB
EK
- Emulators, EconoRom III
Mark S. Riley
- Blown 350 with 1227730 ECM
Dan Townsend
- Emulators, EconoRom III
spidy
- intermittent '747 problem
Mika.Helander at softbit.fi
- Emulators, EconoRom III
Ludis Langens
- Blown 350 with 1227730 ECM
Bruce Plecan
- Retiring Dale Earnhardt's Number Three
jkooser at impsat.com
- intermittent '747 problem
rr
- Blown 350 with 1227730 ECM
rr
- Emulators, EconoRom III
Mark S. Riley
- Adjustable VSSB
ae2598 at wayne.edu
- Adjustable VSSB
ae2598 at wayne.edu
- Blown 350 with 1227730 ECM
Ludis Langens
- Blown 350 with 1227730 ECM
Dan Townsend
- Emulators, EconoRom III
Ludis Langens
- Emulators, EconoRom III
Mark S. Riley
- Blown 350 with 1227730 ECM
Bruce Plecan
- Blown 350 with 1227730 ECM
Dan Townsend
- diy-egor
rr
- Fw: more on netres
Bruce Plecan
- Later MAFs
Kevin Crain
- Later MAFs
Bruce Plecan
- ECM 1227748, creating a new ECU file?
Nick McAlpin
- Blown 350 with 1227730 ECM
Jon Fedock
- ECM 1227748, creating a new ECU file?
Bruce Plecan
- 94 Buick LeSabre ALDL Pinouts
Mikepoore at aol.com
- intermittent '747 problem
Marc Piccioni
- 94 Buick LeSabre ALDL Pinouts
Andrew K. Mattei
- ECM 1227748, creating a new ECU file?
Romans, Mark
- Blown 350 with 1227730 ECM
Dan Townsend
- more on netres
Jon Fedock
- Blown 350 with 1227730 ECM
Bruce Plecan
- Blown 350 with 1227730 ECM
Jon Fedock
- Blown 350 with 1227730 ECM
TK
- Near WideBand O2 sensory (Greddy)
David Tuschhoff
- Blown 350 with 1227730 ECM
Dan Townsend
- Blown 350 with 1227730 ECM
Dan Townsend
- Adjustable VSSB
Daniel Collins
- Adjustable VSSB
Daniel Collins
- VE2 all zeros...?
den Broeder, Ernst
- Suitable Cross for the Cherry drivers?
DC Smith
- VE2 all zeros...?
Bruce Plecan
- Hondo WB O2 and PCV valve
Bruce Plecan
- ECM 1227748, creating a new ECU file?
steve ravet
- beginners info
DianeS at speakeasy.org
- ECM 1227748, creating a new ECU file?
Nick McAlpin
- Hondo WB O2 and PCV valve
bcroe at juno.com
- more on netres
Ludis Langens
- Blown 350 with 1227730 ECM
Bill Shaw
- Blown 350 with 1227730 ECM
chetwagner at qwest.net
- ECM 1227748, creating a new ECU file?
TK
- Blown 350 with 1227730 ECM
Dan Townsend
- ECM 1227748, creating a new ECU file?
Nick McAlpin
- Pic driven UEGO
The Punisher
- Hondo WB O2 and PCV valve
Marteney, Steven J.
- Accel Linear O2 sensor
DC Smith
- ECM 1227748, creating a new ECU file?
steve ravet
- ECM 1227748, creating a new ECU file?
Nick McAlpin
- anyone have any runners ?
DianeS at speakeasy.org
- Palm interface for the '7747
Jim Cottrill
- Blown 350 with 1227730 ECM
rr
- Blown 350 with 1227730 ECM
Bruce Plecan
- Hondo WB O2 Pinout
bcroe at juno.com
- 747 newbie question
Brian Hourigan
- 747 newbie question
steve ravet
- 747 newbie question
Bruce Plecan
- anyone have any runners ?
Marc Piccioni
- anyone have any runners ?
Len Sabatine
- performance parts limited EFI content
Marc Piccioni
- anyone have any runners ?
Red86
- anyone have any runners ?
Dan Townsend
- anyone have any runners ?
Bob Valentine
- anyone have any runners ?
Bob Wooten
- anyone have any runners ?
Allan Langford
- anyone have any runners ?
Ross Myers
- anyone have any runners ?
Shannen Durphey
- [73-87Chevy/GMCTrucks]Vortechs, TBI, and Edelbrock too...oooouu
Jake Kooser
- Blown 350 with 1227730 ECM
ae2598 at wayne.edu
- Blown 350 with 1227730 ECM
ECMnut at aol.com
- anyone have any runners ?
Marteney, Steven J.
- Blown 350 with 1227730 ECM
jkooser at impsat.com
- anyone have any runners ?
Programmer
- Blown 350 with 1227730 ECM
Bruce Plecan
- Blown 350 with 1227730 ECM
ae2598 at wayne.edu
- RPM limits of GM computer/ignition module?
Christopher Bennight
- Blown 350 with 1227730 ECM
ae2598 at wayne.edu
- anyone have any runners ?
Bruce Plecan
- RPM limits of GM computer/ignition module?
Bruce Plecan
- Blown 350 with 1227730 ECM
Bruce Plecan
- Blown 350 with 1227730 ECM
ae2598 at wayne.edu
- RPM limits of GM computer/ignition module?
rahmrh at cableone.net
- anyone have any runners ?
Programmer
- RPM limits of GM computer/ignition module?
Programmer
- Blown 350 with 1227730 ECM
Shannen Durphey
- CS453 group buy
Marc Piccioni
- Update: $6E CL Disable and Idle
Marteney, Steven J.
- 1227148 to 1227749 conversion?
Drew Skinner
- Blown 350 with 1227730 ECM
Bruce Plecan
- RPM limits of GM computer/ignition module?
Bruce Plecan
- New way to tune GM VE tables?
Dave Zug.
- Blown 350 with 1227730 ECM
ECMnut at aol.com
- RPM limits of GM computer/ignition module?
Eric Bryant
- 1227148 to 1227749 conversion?
Bruce Plecan
- 1227148 to 1227749 conversion?
ECMnut at aol.com
- Blown 350 with 1227730 ECM
ae2598 at wayne.edu
- 1227148 to 1227749 conversion?
Bruce Plecan
- 1227148 to 1227749 conversion?
Drew Skinner
- 1227148 to 1227749 conversion?
Drew Skinner
- Blown 350 with 1227730 ECM
rr
- 1227148 to 1227749 conversion?
Bruce Plecan
- Blown 350 with 1227730 ECM
Bruce Plecan
- 1227148 to 1227749 conversion?
Drew Skinner
- GMECM Digest V2 #807
Tom Marracci
- 1227148 to 1227749 conversion?
Ludis Langens
- GMECM Digest V2 #807
Bob Valentine
- 1227148 to 1227749 conversion?
Carl Ijames
- GMECM Digest V2 #807
rr
- Adjustable VSSB
BogHog1 at aol.com
- 1227148 to 1227749 conversion?
rr
- '165 Minimum Air Question...(Round 2)
OneSS2NV at aol.com
- 1227148 to 1227749 conversion?
ECMnut at aol.com
- 1227148 to 1227749 conversion?
ECMnut at aol.com
- 1227148 to 1227749 conversion?
Dan Townsend
- RPM limits of GM computer/ignition module?
Kevin Crain
- Vette injectors FS
ae2598 at wayne.edu
- RPM limits of GM computer/ignition module?
Eric Clark
- 1227148 to 1227749 conversion?
rr
- 1227148 to 1227749 conversion?
rr
- 1227730 with 2 bar Map?
Dan Townsend
- limited efi - performance parts
Marc Piccioni
- 1227148 to 1227749 conversion?
Dan Townsend
- RPM limits of GM computer/ignition module?
Christopher Bennight
- 1227148 to 1227749 conversion?
Shannen Durphey
- RPM limits of GM computer/ignition module?
Shannen Durphey
- Fwd: Re: RPM limits of GM computer/ignition module?
Dale Klein
- 1227730 with 2 bar Map?
Bob Wooten
- RPM limits of GM computer/ignition module?
Christopher Bennight
- 1227730 with 2 bar Map?
Dan Townsend
- 1227730 with 2 bar Map?
rrauscher at nni.com
- RPM limits of GM computer/ignition module?
Bruce Plecan
- 1227730 with 2 bar Map?
Bruce Plecan
- MAF with 747? 730? or any other later ecm?
Brandon
- some table locations I found within 1227429 ECM prom
den Broeder, Ernst
- some table locations I found within 1227429 ECM prom
den Broeder, Ernst
- RPM limits of GM computer/ignition module?
Ludis Langens
- 1227730 with 2 bar Map?
Ludis Langens
- RPM limits of GM computer/ignition module?
Andrew K. Mattei
- application info?
den Broeder, Ernst
- RPM limits of GM computer/ignition module?
Christopher Bennight
- RPM limits of GM computer/ignition module?
Nick McAlpin
- Blown 350 with 1227730 ECM
Meister Brau
- application info?
Bruce Plecan
- application info?
den Broeder, Ernst
- 1227730 with 2 bar Map?
John S. Gwynne
- MAF with 747? 730? or any other later ecm?
rr
- Mystery O2 sensor
The Punisher
- Mystery O2 sensor
Bruce Plecan
- some table locations I found within 1227429 ECM prom
Shannen Durphey
- application info?
Shannen Durphey
- 16168625 ECM
Dave Williams
- 2732A EPROM problem
WEG1192 at aol.com
- 2732A EPROM problem
Zacek DenniS
- RPM limits of GM computer/ignition module?
TK
- 2732A EPROM problem
WEG1192 at aol.com
- 2732A EPROM problem
JTesta1966 at aol.com
- Adjustable VSSB
Mike Wesley
- Adjustable VSSB
Len Sabatine
- lean cruise
rr
- 2732A EPROM problem
WEG1192 at aol.com
- Adjustable VSSB
Romans, Mark
- 16168625 ECM
Gabe
- lean cruise
Romans, Mark
- Adjustable VSSB
Mike Wesley
- 2732A EPROM problem
Carl Ijames
- Adjustable VSSB
Len Sabatine
- RPM limits of GM computer/ignition module?
Shannen Durphey
- lean cruise
rr
- Adjustable VSSB
Mike Wesley
- lean cruise
Bruce Plecan
- Mechanical end of K/S tests
Bruce Plecan
- Felpro 1010s
Bruce Plecan
- 1227148 to 1227749 conversion?
Bruce Plecan
- Blown 350 with 1227730 ECM
Jon Fedock
- RPM limits of GM computer/ignition module?
TK
- RPM limits of GM computer/ignition module?
Gerald Pelnar
- Adjustable VSSB
Len Sabatine
- Mechanical end of K/S tests
Len Sabatine
- Adjustable VSSB
Mike Wesley
- Helpful suggestion
Shannen Durphey
- lean cruise
rr
- Helpful suggestion
Keith D. Miller
- Helpful suggestion
Shannen Durphey
- Helpful suggestion
Keith D. Miller
- Helpful suggestion
ECMnut at aol.com
- Adjustable VSSB
ae2598 at wayne.edu
- Helpful suggestion
ae2598 at wayne.edu
- Helpful suggestion
Keith D. Miller
- Helpful suggestion
Shannen Durphey
- Helpful suggestion
Keith D. Miller
- Helpful suggestion
Bob Valentine
- Helpful suggestion
ECMnut at aol.com
- Helpful suggestion
Dave & Irina Eicher
- Helpful suggestion
Mike Turner/ENGR/HQ/KEMET/US
- Helpful suggestion
Shannen Durphey
- Helpful suggestion
Shannen Durphey
- Helpful suggestion
Mark S. Riley
- Helpful suggestion
Mark S. Riley
- 165 ECU File
Dan Townsend
- Helpful suggestion
Romans, Mark
- diy-EGOR
Bruce Plecan
- felpro 1010s and 8625 software
KasaRyan at aol.com
- Helpful suggestion
Bob Valentine
- RPM limits of GM computer/ignition module?
Ludis Langens
- 98 Vs 94 4L60E
washburn
- diy-EGOR
Barry Tisdale
- Mechanical end of K/S tests
Jeffery Green
- diy-EGOR
rr
- 2732A EPROM problem
bcroe at juno.com
- 98 Vs 94 4L60E
Len Sabatine
- diy-EGOR
bcroe at juno.com
- Chevy Block
Tom Sharpe
- 98 Vs 94 4L60E
Dale Klein
- Helpful Suggestion
Dig
- RPM limits of GM computer/ignition module?
Christopher Bennight
- Manual Idle tweaking
Ross Myers
- TPI fuel pressure
Marteney, Steven J.
- TPI fuel pressure
slowfatslug
- Manual Idle tweaking
Romans, Mark
- TPI fuel pressure
inter7 at mail.delanet.com
- TPI fuel pressure
Marteney, Steven J.
- TPI fuel pressure
Dan Townsend
- TPI fuel pressure
inter7 at mail.delanet.com
- TPI fuel pressure
inter7 at mail.delanet.com
- TPI fuel pressure
Marteney, Steven J.
- 98 Vs 94 4L60E
Len Sabatine
- AANL4045 bin
Ludis Langens
- TPI fuel pressure
Dan Townsend
- TPI fuel pressure
inter7 at mail.delanet.com
- TPI fuel pressure
Greg Westphal
- Turbo Selection
chetwagner at qwest.net
- Turbo Selection
Brent
- TPI fuel pressure
Bja1078 at aol.com
- Manual Idle tweaking
Ross Myers
- TPI fuel pressure
inter7 at mail.delanet.com
- TPI fuel pressure
Marteney, Steven J.
- Manual Idle tweaking
Romans, Mark
- Manual Idle tweaking
Programmer
- Turbo Selection
Bill Shaw
- Programmers and emulators
Drew Skinner
- Programmers and emulators
den Broeder, Ernst
- 98 Vs 94 4L60E
Len Sabatine
- Programmers and emulators
Craig Marcho
- Programmers and emulators
Shannen Durphey
- Programmers and emulators
Drew Skinner
- Programmers and emulators
Steven Ciciora
- Programmers and emulators
den Broeder, Ernst
- TPI fuel pressure
Dan Townsend
- recommended eprom speeds
Chris Abreu
- recommended eprom speeds
Marteney, Steven J.
- recommended eprom speeds
Dan Townsend
Last message date:
Wed Feb 28 22:43:00 GMT 2001
Archived on: Thu May 30 05:42:39 GMT 2013
This archive was generated by
Pipermail 0.09 (Mailman edition).