Manual Idle tweaking

[Programmer]

Depending on code, don't the vette manual bins need a #1 gear
reference ? I'm pretty sure I solved one of these a while back
with this problem. This was a '165 with $32 ID.

Lyndon.
----- Original Message -----
From: Ross Myers <ponty at axis.jeack.com.au>
To: GM_ECM <gmecm at diy-efi.org>
Sent: Sunday, February 25, 2001 11:40 PM
Subject: Manual Idle tweaking


> Hi All,
>
> I'm after some pointers on how to make my car not so easy to stall.
> I think it stalls way to easily, in fact I've noticed in most cars that
you
> can generally park by riding the clutch without any accelerator input.
With
> my car if I try this it will stall.
>
> So, what sort of adjustments should I be looking for as far as the idle
> motor control goes without getting it surging etc, to me it's like the
> stepper is not reacting quick enough to the imminent stall condition.
>
> At idle, the stepper motor position is at 45, and RPM between 750 & 800.
>
> Thanks,
> Ross Myers
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org