Blown 350 with 1227730 ECM
jkooser at impsat.com
jkooser at impsat.com
Thu Feb 22 14:18:00 GMT 2001
Does SyTy mean Syclone / Typhoon? Weren't those little S-10 performance
packages?
Jake Kooser
Field Engineer
Impsat USA
Tel: 1-954-779-7171, Ext. 3250
jkooser at impsat.com
> -----Original Message-----
> From: owner-gmecm at diy-efi.org
> [mailto:owner-gmecm at diy-efi.org]On Behalf
> Of ae2598 at wayne.edu
> Sent: Thursday, February 22, 2001 8:25 AM
> To: gmecm at diy-efi.org
> Subject: Re: Blown 350 with 1227730 ECM
>
>
> I'm not part of the SyTy crowd so maybe there's just some
> things I don't
> understand, but why all the secrecy surrounding the '749 hac?
>
> Would it be so bad for that to be out in the open? Or is somebody
> actually charging $$ for the source?
>
> On Wed, 21 Feb 2001, rr wrote:
>
> >
> > Unfortunately syprom doesn't show addresses. And yes, there
> is a hack around. And unless
> > you are one of the 'in' crowd, well, your not going to see
> it. I've started working on one
> > for the turbo '749, but it is far from really usable. This
> EGOR thing came up and kinda'
> > took over. . .
> >
> > BobR.
> >
> >
> > Bill Shaw wrote:
> >
> > > There IS a commented disassembly around, but the owners
> aren't sharing. Turbo_P4_Doc.pdf is on the FTP site.
(ftp://ftp.diy-efi.org/incoming). While you're there you might want to pick
up a copy of SYPROM.EXE , which will take a '749 bin and list
> > most of the important tables and data in it with the addresses. There's
also a section of the site with a bunch of '749 info. Go to the main page
and follow the links to the ECU info.
> >
> > hth,
> >
> > Bill
> >
>
>
----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org
More information about the Gmecm
mailing list