Blown 350 with 1227730 ECM

[rr]

The easiest way to do this is to burn the bin into both the upper & lower
portion. In dos you can create a bin that has two images in it:

copy /b file.bin + file.bin newfile.bin

This will just copy the file twice to another file. Now you have a 32K file
with that can be programmed right into a 256k eprom.

BobR.


Dan Townsend wrote:

> Ok from what I've seen I can use the syty code in the '730 if I load it in
> the upper 16k of a 32k 27C256.  Is that right?  If so how do I get it into
> the upper part of the EPROM.  I'm using a pocket programmer if that helps
>
> DanT
>
> ----- Original Message -----
> From: "Jon Fedock" <heh at youwish.com>
> To: <gmecm at diy-efi.org>
> Sent: Sunday, February 18, 2001 5:39 PM
> Subject: Re: Blown 350 with 1227730 ECM
>
> > Just right off the top of my head, two of the biggies are the injector
> > constant and egr bpw constants. Others aren't quite so glaring, but
> > aggrivating if trying to accomplish something. Don't get me wrong, I am
> > grateful for it, I used the addresses to tune with. Just gotta check
> > everything. It does have alot of info, but there are gaps. If I just
> wanted
> > to use only what I NEED, I'd be using a carb and points distributor.....;)
> > ;) ;)  <------------See the winkies
> > Jon
> >
> > ----- Original Message -----
> > From: Bruce Plecan <nacelp at bright.net>
> > To: <gmecm at diy-efi.org>
> > Sent: Wednesday, February 14, 2001 7:23 PM
> > Subject: Re: Blown 350 with 1227730 ECM
> >
> >
> > :
> > : What is *alot of errors*?.
> > : what do you NEED that promgrammer doesn't include?.
> > : If we're talking about the same doc., then that is from GM.
> > : Or you looking for a fully commented disassebmly, if so then I don't
> know
> > of
> > : one.
> > : Bruce
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org