98 Vs 94 4L60E

[Dale Klein]

Do you mean PWM for line pressure control from ecm (as opposed to throttle 
valve pressure control), or pwm for TCC lockup?  What would be different 
about the pump?, wouldn't the pump be the same, the difference would be how 
the pump control pressure gets generated (and thus the probably different 
connectors)?
Thanks, Just curious....        Dale

At 09:43 PM 2/25/01 -0500, you wrote:
>       Might want to check if 94 4L60E has PWM Pump , 98 has it , OBD2 PCM
>       will be looking for it. If 94 is sans , Install later PWM Pump and 
> change the
>       internal harness and connector. Trans control harness from 94 PCM 
> will be
>       missing the required extra wire[s]. Ya just need to compare what 
> you have
>       against the 98. Most 95 and later 4L60Es are PWM, Most 94 and earlier
>       are not. The 98 trans should have  a bolt on bell housing , your 94 
> may not.
>       Compare all functions from the 98 to your 94 , avoids problems 
> later.You'll
>       need longer Selector- Detent  shaft to utilize the external PRNDL / 
> BackUp
>       Light switch module and the needed Metri Pack connectors.If you get 
> the 98
>       Trans, get torque converter with it.   FYI.
>       Len
>
>>I need a quick answer on this one. I have some manuals on the way but I
>>don't think they'll get here in time. I currently have a 94 TBI 5.7L w/
>>4L60E setup. I have found a good deal on a 98 model Vortec 5.7L that
>>originally had a 4L60E as well. I want to remove the TBI motor and drop in
>>the Vortec. I need to know if the VCM from a 98 C1500 w/5.7L & 4L60E tranny
>>will work with a similar 94 model 4L60E.  I know the '98 4L60E has a PRNDL
>>switch and my 94 does not. My 94 does have the bosses on the tranny for it
>>though. I will install the PRNDL switch on the '94. I just want to double
>>check and make sure they didn't change the location of any wires within the
>>wiring harness plug at the tranny etc. I can scan in the 94 model diagram
>>from the manual if anyone has a newer manual to compare with. I just need to
>>know if this will work before I buy the engine.
>>Thanks
>>Paul Washburn
>>lpwcruzr at sysmatrix.net
>>
>>----------------------------------------------------------------------------
>>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>


Shop online without a credit card
http://www.rocketcash.com
RocketCash, a NetZero subsidiary
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org