Injector ID help please

[Programmer]

I'm showing useage 1989-1992 Pontiac and 1990-92 Chevrolet.
5.0L F body cars.

Lyndon.
----- Original Message -----
From: Andrew McRory <amacc at iron-bridge.net>
To: gmecm List <gmecm at lists.diy-efi.org>
Sent: Saturday, February 10, 2001 7:57 AM
Subject: Injector ID help please


>
> Greetings,
>
> As I wrote about one month ago I recently acquired a TPI unit that
> was supposedly offn a 305 engine... It has grey body injectors which led
> me to believe (hope) it may actually be off a 350... that would be great
> and maybe save me from buying new injectors for a little while at least..
>
> Anyway, it was suggested I look at www.fuelinjection.com and try to
> identify the fuel rail as that information might help as long as we can
> trust the original owner didn't mix and match parts...
>
> Turns out the fuel rail is a 17090100 which although not listed there
> would have fallen into the middle of a group of 350 corvette part numbers
> (hopes are getting higher!). So I called local GM and asked if they could
> identify the injector by P/N but they came back with "no such part
> number"...
>
> How can I figure out what these injectors are? They have grey bodies with
> a blue paint dot on each. The part number  wraps around the top of the
> injector and reads "7090 17086543".
>
> Thanks for any help
>
>
> Andrew in Florida! Go Figure!
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org