165 ECU File

[Marteney, Steven J.]

If Dan is still out there, did this ever get completed?  Was going through
some old mail and curious.
Steve

-----Original Message-----
From: Dan Townsend [mailto:xybertron at cox-internet.com]
Sent: Sunday, October 29, 2000 8:49 AM
To: gmecm at diy-efi.org
Subject: Re: 165 ECU File


Wow I didn't figure this many people would want it.  With the added interest
I am taking the time to verify it and add anything that might be missing.
Should be done later today and then I will post it.  I'll keep everyone
informed on my progress.  As of now I have verified 3 Map's plus fan turn
on/off and 10 Arrays plus the MAF arrays.  Now I need to see if I am missing
any Arrays and Maps and then double check the Value section.  I don't have
any of the flags ;-(

BTW - This 165 is based off a 89 bin.  This will allow you to unhook the
cold start valve and block it off if you want.  I still need to find out how
to disable VATS with this ecu.

If anyone wants to help that has an aftermarket proggie and can modify a bin
and return it to me then please e-mail me so I can figure out the locations
of the flags like VATS.  Thanks.

Dan
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org