1227730 with 2 bar Map?

[Bruce Plecan]

Would work fine, for as far as you mention, but what about the baro stuff?.

Best solution is adding a Baro input (like John did), and then expand the
tables and use a 2 bar MAP input.
Bruce


> So I was curious and started reading what a 2 bar Map does.  Basically you
> get the same voltage as a 1 bar Map but the readings are actually double.
> So what would keep me from using a 2 bar Map but with the 730 ECM and 730
> code but tune what the computer now sees as 50 KpA to actually be the real
> 100 KpA.  This would allow me to tune the setup to up to 14.7 lbs of
boost.
> Does this sound like I'm on the right track?  The only thing left is doing
> the VE tables and spark Map.  This would leave me with all the
functionality
> as before.
>
> Would I be better to drop what the computer thinks the injectors are so I
> could keep away from 100+ % VE tables or would it work better to make it
> think the engine is a 11.4 L or something like that?
>
> DanT - Is this a good idea or time for me to put on the CSH?  :-)
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org