Accel injectors

[Bruce Plecan]

Lets see, Duty cycle of 80%, intake valve open about 25%,  of the time, the
fuel mostly is being blown on a closed valve, given those stats you really
think the atomization is much of a deal?.

It's alot more about HP, and torque then engine size
19s will support about 300 HP.
Your results will vary
Bruce



> I, too, have heard that a 350 can get away with 19#'ers at a
> higher-than-stock pressure.  It has been said that, all things equal,
> you'll run better that way because of better fuel atomization.
>
> Anyone care to confirm/deny this?  Any of you guys running a 350 with 19#
> injectors?
>
> On Sat, 6 Jan 2001, Dan Townsend wrote:
>
> > Stock 305 is 19#
> > Stock 350 is 22#
> >
> > Several individuals including myself use 24# SVO's with no problems.
> >
> > Dan
> >
> > ----- Original Message -----
> > From: "Diane Stowe" <DianeS at speakeasy.org>
> > To: <gmecm at diy-efi.org>
> > Sent: Saturday, January 06, 2001 11:50 AM
> > Subject: Re: Accel injectors
> >
> >
> > > I have a similar question on Accel injectors. Summit has sets for very
> > > attractive prices. I need a set of 8 for my stock 350, most places
have
> > sets
> > > for $445 +. Summit has sets for $280+ ? They are bosch injectors I
think.
> > >
> > > If you all don't mind a beginner question or two ?
> > >
> > > for a stock 350 what #lb rating should my injectors have ? different
> > vendors
> > > tell me different things.
> > >
> > > the set I received with my used tpi setup, are I'm told a 305 set,
which
> > > would run too lean for a 350. However I have also been told that the
305
> > > injectors would work fine in a 350 up to something like 350-375 HP.
> > >
> > > some of my used injectors are missing the clips, the pintle caps on
some
> > are
> > > broken or missing.  one such injector has the pintle ? retracted or
pushed
> > > back in.
> > >
> > > so at 15-20+ dollars apiece to get them rebuilt, it would seem that
the
> > > summit set would be a better idea. However they have several different
#lb
> > > sizes for a 350 tpi, and I don't know which set I would use.
> > >
> > > if anyone could help that would be great, I'd appreciate it.
> > >
> > > thanks, and a happy new year to everyone
> > >
> > > Diane
> > > ----- Original Message -----
> > > From: <akallotte at juno.com>
> > > To: <gmecm at diy-efi.org>
> > > Sent: Saturday, January 06, 2001 5:22 AM
> > > Subject: Accel injectors
> > >
> > >
> > > > Has anyone used the Accel injectors?  Accel says they are rated at 3
> > bar,
> > > > 14.4 ohm, and are pintle type.  They say they are stock length
> > > > replacements for TPI.  Are they the same as SVOs?  Or are they
actually
> > > > closer to the stock TPI injector?
> > > > ________________________________________________________________
> > > > GET INTERNET ACCESS FROM JUNO!
> > > > Juno offers FREE or PREMIUM Internet access for less!
> > > > Join Juno today!  For your FREE software, visit:
> > > > http://dl.www.juno.com/get/tagj.
> > >
> >
> --------------------------------------------------------------------------
> > > --
> > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > > in the body of a message (not the subject) to
> > majordomo at lists.diy-efi.org
> > > >
> > > >
> > >
> >
> --------------------------------------------------------------------------
> > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> > >
> > >
> >
>
> --------------------------------------------------------------------------
--
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org