VN V6 3 coil ignition

[Justin Albury]

Nice Idea......but its a little more involved than that the v6 hall pickup
is at the front of the engine and is part of the harmonic balancer (well
when I say part of ....well with care you could get the interupt ring off)
the sensor is simple .....its just a dual hall pickup. the problem is that
the windows are configered for V config not an inline and keep in mind that
the buick V6 is a 90 degree V hence the 3X and 18X would in theroy be 90
degree out of timming (any one got any more thoughts on this one)  but dont
rule out the use of the DFI coil pack ....have a look the files area Im sure
I uploaded details on this about 18 months ago......if not let me know And I
will scan all that i have.....

Justin

> I'm toying with the idea of using the VN V6 DIS module on my inline six 
> (with 808). Just wondering what type of crank angle sensor it uses -hall 
> etc.., where it's located, and how it works. Would it be hard to adapt to
a 
> different engine?
> 
> Thanks.
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
> 
>
----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org