Document re-uploaded

[Dave Zug]

I'll do what I did with the ARAP bin, take the timing out of the entire
table and ramp it up slow.  ARAP went into my thirdgen, but it DID have alum
aftermarket heads.

Appreciate the Binz, YES Please!  730 will be used so 727 is perfect.


My 400 will have all the common coolant passage mods done to it, except the
external pipe (eww!).

THX.

----- Original Message -----
From: Shannen Durphey <Shannen at grolen.com>
To: <gmecm at diy-efi.org>; Dave Zug <dzug at delanet.com>
Sent: Sunday, January 28, 2001 1:52 PM
Subject: Re: Document re-uploaded


> This is kewl.  I never even responded to the ARFP thread until today.
> DZ, if you're looking for manual tranny .bins for the 7727, speak up.
I've
> still got a few left.
>
> Unless you're running a ton of gear, Vette bins have too much spark
advance
> for iron heads.  And 383's (same stroke as the 400) often need slightly
less
> timing at lower rpm.  And 400's tend to get warmer than 350 block based
> engines. Just FYI, in case you haven't experienced this before.
>
> Shannen
>
>
> Dave Zug wrote:
> >
> > Following grabbing Shannen's ARFP (thanks! I have a manual 400 TPI in
the
> > works for '730!) I noticed that a document I had uploaded to FTP was
blank.
> > I uploaded it a while ago. its a text file for you programming types
> > (without assemblers) for doing a multiple-spark table patch on a '727. I
> > think it was even linked from the main EFI page under projects. Anyway,
I
> > RE-uploaded it under the name "727tpsck2.txt".  the file name means "727
ecm
> > TPS check" and basically runs thru some extra operations to see if the
> > driver wants to use the stock (primary) spark table or the optional
spark
> > table. I do not think anyone mailed me with questions or interest, or
even
> > negative feedmack but I put it back up there anyway... disclaimer
intact.
> >
> > I have made a utility to slip this patch into a chip file, but there are
> > many pre-checks for appropriate use I have not incorporated... still
playing
> > with it, but if anyone is interested in a commercial licensing of the
> > feature, just read the document, steal it and don't tell me how rich it
made
> > you.  ;-)
> >
> > ----- Original Message -----
> > From: Jeremy Gonyou <jgonyou at hotmail.com>
> > To: <gmecm at diy-efi.org>
> > Sent: Sunday, January 28, 2001 7:14 PM
> > Subject: Re: ARFP 7185
> >
> > >
> > >
> > > I read this whole thread without realizing that this memcal was
sitting
> > > right in front of me.  Shannen, ARFP7185 is now posted in incoming.
> > >
> > > Jeremy
> > > _________________________________________________________________
> > > Get your FREE download of MSN Explorer at http://explorer.msn.com
> > >
> >
> --------------------------------------------------------------------------
> > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> > >
> > >
> >
>
> --------------------------------------------------------------------------
--
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org