anyone try this

[Gary Heuston]

I didn't see a link to that information anywhere on the site...do you have one
that you can post?  I would be interested in reading up on this subject...

Gary
gary.heuston at afwa.af.mil


"Cosby, Melvin C. (GEL, MSX)" wrote:

>         Hi everyone, this is my first post.  I really enjoy reading this
> list.
> The October 2000 issue of Circuit Cellar describes this OBD II protocol
> converter.  It is from ISO to RS232.  The magazine article talks mostly
> about the ISO protocol.  The hardware design is in the magazine and the
> microcontroller and PC software can be downloaded from the web site you
> mentioned.  Look at the bottom of the page for a link titled "Circuit Cellar
> Readers...".  It is ISO 9141-2 only.
>         Since the article was published the Ford and GM protocols have
> appeared as options on the web site.  If you built the converter from the
> article I don't know if he would sell just software for the other protocols.
> It wouldn't hurt to ask.
>
> Later,
> Mel
>
> PS The Circuit Cellar article is what got me searching on the web for EFI
> material.  That is how I came to subscribe to this list.
>
> -----Original Message-----
> From: toddburkard at pcmc.com [mailto:toddburkard at pcmc.com]
> Sent: Friday, July 06, 2001 4:44 PM
> To: gmecm at diy-efi.org
> Subject: anyone try this
>
> Has anyone tried this Scan tool for the OBD II?
>
> http://www.ghg.net/dharrison/obdscan.html
>
> Or has anyone built a cable and found some software that works with it for
> the OBD II GM's?
>
> Thanks,
> Todd
>
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org