1228062 info

[justin]

Excelent Thank you so much!
----- Original Message -----
From: "Reid Bishop" <rbish at attglobal.net>
To: <gmecm at diy-efi.org>
Sent: Monday, July 30, 2001 9:02 PM
Subject: RE: 1228062 info


> Yes, the '8062 has essentially the same pinout as a '7747.  Although I do
> not know if each and every pin is the same, I myself have run both a '7747
> and an '8062 on the same harness in my 4.3 equipped Cherokee.  I never got
> the '7747 to run anywhere near as good as the '8062, but it does run
indeed.
> I believe the '8062 is better equipped for the 4.3 EGR, as well as the
> Open-Loop mode.
>
>
> -----Original Message-----
> From: owner-gmecm at diy-efi.org [mailto:owner-gmecm at diy-efi.org]On Behalf Of
> justin
> Sent: Tuesday, July 24, 2001 12:08 PM
> To: gmecm at diy-efi.org
> Subject: 1228062 info
>
>
> Hello there I have been lurking on this list for quite a while now.
>
> I have just gotten a new motor and am in the process of grafting the ecu
in
> place of my old one and have not been able to find a pinout for it.  It is
a
> 1228062 from a 91 S-10 Blazer or does the pinout possibly match the 747
ecu
> which was also found on the same model and year?
>
> Any help would be appreciated thanks guys!
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org