Code 32 on 165

[Programmer]

Yes--pretty hard day yesterday...packed the church and basement out...he was
a pretty
popular kid. I'll send ya the EVAP charts right away...appreciate the
prayers !!

Lyndon.
----- Original Message -----
From: Marteney, Steven J. <smarteney at xlvision.com>
To: <gmecm at diy-efi.org>
Sent: Friday, June 22, 2001 10:04 AM
Subject: RE: Code 32 on 165


> Thanks Lyndon.  I just received the fax.  Much better than my Chilton BS,
> obviously.  Is there any way you could send me any kind of EVAP canister
> troubleshooting chart, too?  I'm starting to figure that out via logic and
> mostly list help, but still struggling.
>
> Very sorry to here about your nephew.  All I can offer is my prayers.  I
> don't even know what to say.  Really makes the "embarrassing GM
engineering"
> arguments petty, and everything else we do.  Life means so much.
>
> Steve
>
> -----Original Message-----
> From: Programmer [mailto:nwester at eidnet.org]
> Sent: Friday, June 22, 2001 10:21 AM
> To: gmecm at diy-efi.org
> Subject: Re: Code 32 on 165
>
>
> Hi--just got back. Buried my nephew yesterday--not a good day...
>
> Lyndon.
> ----- Original Message -----
> From: Marteney, Steven J. <smarteney at xlvision.com>
> To: <gmecm at diy-efi.org>
> Sent: Thursday, June 21, 2001 6:52 AM
> Subject: RE: Code 32 on 165
>
>
> > That would be interesting to look at.  Fax to 561-581-7313, to my
> attention.
> > There is definitely a temp sensor in the base of the EGR valve.  Do you
> > think it may still look at the integrator to verify???
> >
> > Thanks!  Steve
> >
> > -----Original Message-----
> > From: Programmer [mailto:nwester at eidnet.org]
> > Sent: Wednesday, June 20, 2001 6:20 PM
> > To: gmecm at diy-efi.org
> > Subject: Re: Code 32 on 165
> >
> >
> > Here's a couple tidbits...depending on how it interprets EGR
flow--there's
> > either the temp
> > sensor on the EGR valve, as mentioned, or it looks at or for an
integrator
> > value change
> > at cruise. If you've got a fax number, Steve--I can send you the GM code
> 32
> > chart...
> >
> > Lyndon.
> > ----- Original Message -----
> > From: Marteney, Steven J. <smarteney at xlvision.com>
> > To: <gmecm at diy-efi.org>
> > Sent: Wednesday, June 20, 2001 2:03 PM
> > Subject: Code 32 on 165
> >
> >
> > > Anyone have any insight into Code 32's on a 165?  I started setting
Code
> > 32
> > > again last week, coincidentally after going to a 195deg stat from a
180
> > > hi-flo.  It mainly sets in the morning after about 10 minutes of 75-80
> > > highway speeds.  It set one time in the evening after work same
> > conditions.
> > > The EGR valve and temp diag switch are new within 2 years (and vacuum
> > > lines).  The vac solenoid is new within a year.  That's what solved
this
> > > problem before.  Any connection bewteen the higher engine temps and
this
> > > thing suddenly setting code 32?  BTW, it didn't set it this morning.
> > First
> > > time I drove it on the highway in 5 days.
> > >
> > > Steve
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org