Help with an '86 1/2 Corvette

[Bruce Plecan]

From: "Kieran Alexander Cox" <kcox at polymail.cpunix.calpoly.edu>
> I am new to this mailing list and to modifying my ECM. Does anyone
> know the type of ECM that is installed in my 'vette? Some online research
> has shown it to be a 1227165. Although I am not sure if GM did something
> different for the Corvette. Basically I need all the technical info on
> the ECM and the pinouts.
> I designing an E/T Timer and on-the-fly scan tool as my senior
> project for the car. Any help is greatly appreciated!

There is just tons of ALDL info. in the archives.
For ET though, the sampling rate is really too slow.
There is an edge card series of terminals in the ecm that are on the actual
PCB that might be the best way to tackle the timer.   Even better might be
just using the VSS input.
Bruce

> Kieran
> P.S. I am looking for a summer intership in this field. If you have any
> info or would like my resume please mail me back directly. Thanks again!

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org