info req on 7748 computers

[Shannen Durphey]

Minor point, but you got that ecm from a 6000, not a J 2000.  The J cars were never
equipped w/ 2.5.

Isn't this the same ecm as used in Fieros?  Might want to poke around Ludis' site. 
The calibrations I find for that engine (LR8) and 5 speed trans stop in 1988 with
the Fiero.  There are calibrations for another 2.5(L68) w/ 5 speed and 7748 in
1990, including ASLD2107, and ASLF2112.  Neither of these are for the 6000.

There are also many other years which list calibrations for this engine/trans/ecm. 
It looks promising for your swap.

Mind sending the .bin this way?
Shannen  

pat ford wrote:
> 
> Hi All;
>  yesterday I got a 7748 ( with another number 16145991) and everything thing else from a 1990 Pontiac J2000. I snarfed the whole engine harness all the sensors, and all the connectors, even the DIS system.
> 
>  My questions are:
> 1)how close is this to either the 730 or 747 computers ( how much info is out there?)
> 
> 2) the bcc from the eprom is ATRB 6062 this is a 2.5L 4cyl auto(fwd) DIS system, is there a 5 speed cal for it? what other bins will work??
> 
> 3) is ths a good system to put into a car or is it good for play only?
> 
>  ps anyone want a copy of the bin when I pull it??
> thanks
> 
> Pat Ford
> 12 Strathcona St
> Smith Falls,On
> 613-283-4703
> __________________________________________
> Sent by Sofcom Mail - The world's coolest and safest FREE email service.
> http://www.sofcom.com.au
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org