Idle and the idle VE table

[cmillard at crutchfield.com]

His INT's went to 156, hehe... I'd say that's a pretty wierd "code swing"
hehe.. I always picture the BLM and INTs being old style tuning knobs on a
radio, with a 156 INT I visualize ripping the tuning knob off..hehe.. 
 
Although if your BLM's are all 128 and you want to tweak your VE tables the
Nth degree, tuning by INT's could be possible, but a lifetime is a little
short for that. Heck, that's what a dynamic fuel trim is for, to adjust
dynamically.
 
-Christian
( I feel like Oblio, from "The Point", everyone around me has a cone shaped
head, but mine is round..hehe... see
http://home1.gte.net/Oblio/moreoblio.htm
<http://home1.gte.net/Oblio/moreoblio.htm>  if you never saw the 1971 movie
(hey I was -1 years old! )

-----Original Message-----
From: Programmer [mailto:nwester at eidnet.org] 
Sent: Wednesday, September 26, 2001 12:27 AM
To: gmecm at diy-efi.org
Subject: Re: Idle and the idle VE table


That's right...I'm just wondering if the code swings weird when you set the
mins and max that way. There IS easier
ways to stay open loop. His big question is the Winbin "ecu"
files--depending on who made the file, or how the file
was interpreted, he may not be editing where he thinks he is.
 
Lyndon

----- Original Message ----- 
From: cmillard at crutchfield.com <mailto:cmillard at crutchfield.com>  
To: gmecm at diy-efi.org <mailto:gmecm at diy-efi.org>  
Sent: Tuesday, September 25, 2001 11:22 AM
Subject: RE: Idle and the idle VE table


Lyndon,  
BLMs can be "locked" by setting Min and Max BLM to 128, I'm sure there are
other ways. 
I wouldn't do it regardless (I know you wouldn't), there are easier ways of
running open loop. 

-Christian 

-----Original Message----- 
From: Programmer [mailto:nwester at eidnet.org <mailto:nwester at eidnet.org> ] 
Sent: Tuesday, September 25, 2001 2:48 PM 
To: gmecm at diy-efi.org 
Subject: Re: Idle and the idle VE table 


How'd you lock the BLM's ? I'm just guessing ,but if they're locked, the INT
is going to go sky high "trying" to move the BLM. One thing about the ECU
files--sometimes what you think you're modifying isn't the right area.  Try
modifying the ENTIRE table a couple times to check this. Just modify the
main VE table.

Lyndon. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.diy-efi.org/pipermail/gmecm/attachments/20010926/fdd79ed6/attachment.html>